Package: installation-reports
INSTALL REPORT
Debian-installer-version: <05.08.04 ftp tu-berlin>
uname -a: <Linux aa 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686
GNU/Linux>
Date: <06.09.04 20:30>
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
Burnt CD 1, booted from that CD, missing software from deb
http://ftp.tu-clausthal.de/pub/linux/debian/ testing main
Machine: <Description of machine (eg, IBM Thinkpad R32)>
Processor: AMD 1GHz
Memory: 256 MB (RAM)
Root Device: <IDE? SCSI? Name of device?>
Root Size/partition table: Feel free to paste the full partition
table, with notes on which partitions are mounted where.
Output of lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP]
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 74)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC
AGP (rev 7a)
and lspci -n:
0000:00:00.0 0600: 1106:3099
0000:00:01.0 0604: 1106:b099
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.5 0401: 1106:3059 (rev 50)
0000:00:12.0 0200: 1106:3065 (rev 74)
0000:01:00.0 0300: 1002:475a (rev 7a)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [ E]
Configure network HW: [O]
Config network: [O]
Detect CD: [E]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [E]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Usually my systems contain one small IDE-HD and one or more SCSI-HD's.
I started with one 2GB IDE HD, one IDE-CDD, the DC-2974 PCI
SCSI-Controller an two 4GB and 1GB SCSI-HD's.
That did not work and wasted a lot of time. The installation worked only
after removing the SCSI-equipment.
The 2GB ide-HD was replaced by a 4GB one. Everything run pretty well then.
Bevor I only once installed Debian Woody (with no essential problems).
Together with the mentioned SCSI-controller I prefer the AM53/79C974
module, whitch I did not find for Sarge.
I think my problems came from the only matching modul TMSCSIM. I used
this controller with many Linux, FreeBSD
and other installations whithout any problems.
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to [EMAIL PROTECTED]
My first impression to Sarge is very good. I like it up to now. Thankyou
for the fine development!!
R.Wildenrath
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
