Package: installation-reports
Debian-installer-version: 20040904 from
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/
uname -a:
Date: 2004-09-04 22:50
Method: net installation. Boot from an ATAPI CD-ROM. Default behaviour.
Machine: A custom PC that already runs a debian (originaly a
woody, now a sarge)
Processor: AMD Athlon XP 1700+
Memory: 1 GB
Root Device: IDE (a ST320011A HD)
Root Size/partition table:
Disk /dev/hdb: 20.0 GB, 20020396032 bytes
16 heads, 63 sectors/track, 38792 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 1 3876 1953472+ 82 Linux swap
/dev/hdb2 3877 38792 17597664 83 Linux
Output of lspci and lspci -n:
lspci ->
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP]
0000:00:08.0 Multimedia video controller: Brooktree Corporation Bt848
Video Capture (rev 12)
0000:00:09.0 Multimedia audio controller: Creative Labs SB Audigy
(rev 03)
0000:00:09.1 Input device controller: Creative Labs SB Audigy
MIDI/Game port (rev 03)
0000:00:09.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire
Port
0000:00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M
[Tornado] (rev 78)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA
Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (rev 1b)
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (rev 1b)
0000:00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (rev 1b)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 30)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA
G550 AGP (rev 01)
lspci -n ->
0000:00:00.0 0600: 1106:3099
0000:00:01.0 0604: 1106:b099
0000:00:08.0 0400: 109e:0350 (rev 12)
0000:00:09.0 0401: 1102:0004 (rev 03)
0000:00:09.1 0980: 1102:7003 (rev 03)
0000:00:09.2 0c00: 1102:4001
0000:00:0b.0 0200: 10b7:9200 (rev 78)
0000:00:11.0 0601: 1106:3074
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.2 0c03: 1106:3038 (rev 1b)
0000:00:11.3 0c03: 1106:3038 (rev 1b)
0000:00:11.4 0c03: 1106:3038 (rev 1b)
0000:00:11.5 0401: 1106:3059 (rev 30)
0000:01:00.0 0300: 102b:2527 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't
try it
Initial boot worked: [0]
Configure network HW: [0]
Config network: [0]
Detect CD: [0]
Load installer modules: [O/E]
Detect hard drives: [E]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
When kernel modules loading for the IDE support, I have a message like:
via-irc, ide-scsi, ide-mod, ide-prob-mod, ide-detect, ide-floppy not
loaded because not present!
So, no IDE devices are detected and as consequently the partman program fails.
Other bug: when partman program fails by saying no devices to
partition are detected, and after continuing, the installer displays
a blue screen with no way for the user to interact with it.
Miguel Moquillon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
