Package: installation-reports
INSTALL REPORT
Debian-installer-version: sarge-i386-businesscard.iso (Aug 3 Daily)
uname -a: Linux up1 2.6.7-1-686 #1 Thu Jul 8 05:36:53 EDT 2004 i686 GNU/Linux
Date: Wed Sep 1 13:00 EDT 2004
Method:
Installed from business card cd. Packages downloaded from
ftp.debian.org (no proxy was involved)
Machine: IBM BladeServer HS20 8832
Processor: 2 x 3.2 Ghz Intel Xeon
Memory: 4 GB
Root Device: IDE (TOSHIBA MK4019GAXB) 40 GB PCMCIA Hard Drive
Root Size/partition table:
--partition table--
Disk /dev/hda: 40.0 GB, 40007761920 bytes
16 heads, 63 sectors/track, 77520 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System Mount
/dev/hda1 1 77520 39070048+ f W95 Ext'd (LBA)
/dev/hda5 * 1 1938 976689 83 Linux /
/dev/hda6 73646 77520 1952968+ 82 Linux swap swap
/dev/hda7 1939 9688 3905968+ 83 Linux /usr
/dev/hda8 9689 25189 7812472+ 83 Linux /var
/dev/hda9 25190 40690 7812472+ 83 Linux /tmp
--partition table--
Output of lspci and lspci -n:
--lspci output--
0000:00:00.0 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset) (rev 33)
0000:00:00.1 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset)
0000:00:00.2 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset)
0000:00:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:00:0f.0 Host bridge: ServerWorks CSB6 South Bridge (rev b0)
0000:00:0f.1 IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev b0)
0000:00:0f.2 USB Controller: ServerWorks CSB6 OHCI USB Controller (rev 05)
0000:00:0f.3 ISA bridge: ServerWorks GCLE-2 Host Bridge
0000:00:10.0 Host bridge: ServerWorks CIOB-E I/O Bridge with Gigabit Ethernet (rev 12)
0000:00:10.2 Host bridge: ServerWorks CIOB-E I/O Bridge with Gigabit Ethernet (rev 12)
0000:00:11.0 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 03)
0000:00:11.2 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 03)
0000:01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit
Ethernet (rev 02)
0000:01:00.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit
Ethernet (rev 02)
0000:03:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 07)
--lspci output--
--lspci -n output--
0000:00:00.0 0600: 1166:0014 (rev 33)
0000:00:00.1 0600: 1166:0014
0000:00:00.2 0600: 1166:0014
0000:00:01.0 0300: 1002:4752 (rev 27)
0000:00:0f.0 0600: 1166:0203 (rev b0)
0000:00:0f.1 0101: 1166:0213 (rev b0)
0000:00:0f.2 0c03: 1166:0221 (rev 05)
0000:00:0f.3 0601: 1166:0227
0000:00:10.0 0600: 1166:0110 (rev 12)
0000:00:10.2 0600: 1166:0110 (rev 12)
0000:00:11.0 0600: 1166:0101 (rev 03)
0000:00:11.2 0600: 1166:0101 (rev 03)
0000:01:00.0 0200: 14e4:16a8 (rev 02)
0000:01:00.1 0200: 14e4:16a8 (rev 02)
0000:03:01.0 0100: 1000:0030 (rev 07)
--lspci -n output--
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
The install went flawlessly and without a hitch. Much easier than getting woody
on these systems, which required debootstrapping from a live cd, due the the odd
usb/pcmcia subsystems. Since I like minimal cruft when building my servers, the
minimal number of installed packages serves me well. Thanks again to all of the
d-i team for a great effort.
--asg
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
