Package: installation-reports INSTALL REPORT
Debian-installer-version: 24 August 2004, York University uname -a: Linux touch 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686 GNU/Linux Date: noon 24 August 2004 Method: How did you install? net install What did you boot off? sarge-i386-netinst.iso on a CD. If network install, from where? deb http://debian.yorku.ca/debian/ testing main Proxied? no. Machine: "Touch" desktop Processor: Intel Pentium II (Deschutes) Memory: 382588 kB Root Device: IDE Western Digital 60 gB Root Size/partition table: / 3.9 gB on hb1, swap 0.5 gB on hb5, /home 50gB on hdb3. Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:0a.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 12) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV10DDR [GeForce 256 DDR] (rev 10) 0000:00:00.0 0600: 8086:7190 (rev 03) 0000:00:01.0 0604: 8086:7191 (rev 03) 0000:00:07.0 0601: 8086:7110 (rev 02) 0000:00:07.1 0101: 8086:7111 (rev 01) 0000:00:07.2 0c03: 8086:7112 (rev 01) 0000:00:07.3 0680: 8086:7113 (rev 02) 0000:00:0a.0 0200: 1186:1002 (rev 12) 0000:01:00.0 0300: 10de:0101 (rev 10) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [E] (no sound) Install boot loader: [O] Reboot: [O] Comments/Problems: Wonderfull at 3 mb/s! First install with an onboard (Asus P2B-VM) old ESS Solo11938 chip. Bad sound. Second install with a Creative Labs ISA SB16. No sound. Third install with a Creative Labs ISAPNP AWE64. No sound. I've exhausted variations from alsa.opensrc.org/index.php?page=Quick+Install and www.alsa-project.org/alsa-doc/. modprobe snd-sbawe FATAL: Error inserting snd_sbawe (/lib/modules/2.6.7-1-386/kernel/sound/isa/sb/snd-sbawe.ko): No such device (Note that this sound is good with a Knoppix boot). Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
