Package: installation-reports Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20040821/sarge-i386-netinst.iso (md5sum is 3c9d0169c92e3fbd570dd3bee97ab0dc which is ok) uname -a: Linux debian 2.4.26-1-386 #1 Thu Jul 22 12:46:23 JST 2004 i686 GNU/Linux Date: Sun Aug 22 17:46:11 EEST 2004 Method: From USB CD-ROM ('USB CD' boot option in BIOS), Network installation from ftp.fi.debian.org (no proxy)
Machine: Generic PC Processor: Intel P4 Xeon 3Ghz (HT enabled) Memory: 1 GB Root Device: /dev/md0 (RAID1 on /dev/hda1 and /dev/hdc1) Root Size/partition table: debian:~# fdisk -l /dev/hda Disk /dev/hda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 4741 38082051 fd Linux raid autodetect /dev/hda2 4742 4865 996030 82 Linux swap debian:~# fdisk -l /dev/hdc Disk /dev/hdc: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdc1 1 4741 38082051 fd Linux raid autodetect /dev/hdc2 4742 4865 996030 82 Linux swap Output of lspci and lspci -n: debian:~# lspci 0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) 0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 0000:01:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 0000:01:0a.0 Ethernet controller: Intel Corp. 82541EI Gigabit Ethernet Controller (Copper) 0000:01:0b.0 Ethernet controller: Intel Corp. 82541EI Gigabit Ethernet Controller (Copper) debian:~# lspci -n 0000:00:00.0 0600: 8086:2578 (rev 02) 0000:00:1d.0 0c03: 8086:24d2 (rev 02) 0000:00:1d.1 0c03: 8086:24d4 (rev 02) 0000:00:1d.2 0c03: 8086:24d7 (rev 02) 0000:00:1d.3 0c03: 8086:24de (rev 02) 0000:00:1d.7 0c03: 8086:24dd (rev 02) 0000:00:1e.0 0604: 8086:244e (rev c2) 0000:00:1f.0 0601: 8086:24d0 (rev 02) 0000:00:1f.1 0101: 8086:24db (rev 02) 0000:00:1f.3 0c05: 8086:24d3 (rev 02) 0000:01:09.0 0300: 1002:4752 (rev 27) 0000:01:0a.0 0200: 8086:1013 0000:01:0b.0 0200: 8086:1013 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: System works ok after installation. With RC1 I had the watchdog-reboot-loop problem that was described in errata. I didn't test if the problem was still in this release, I just directely booted to recovery and moved away the following files: /etc/rcS.d/S40hotplug /etc/init.d/hotplug Reboot-problem hasn't occured anymore. The installer gave a warning that boot with root on md-device won't work, even tough it worked fine. This is related to bug #259238 which is resolved. Could the warning be removed? Suggestion: Lots of options in 'tasksel' that were present in woody are now missing. I was looking for something like 'C++ developement enviroment'. -- Jukka Merinen -- [EMAIL PROTECTED] -- http://www.iki.fi/jmerinen/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
