On Fri, Aug 20, 2004 at 01:54:09AM -0400, Rick Thomas wrote:
>
> On Thursday, August 19, 2004, at 12:08 PM, Rick Thomas wrote:
>
> >
> >On Thursday, August 19, 2004, at 05:00 AM, Sven Luther wrote:
> >>
> >>>happy floppy disk reading noises. However, the noises eventually
> >>>stopped and a red "X" appeared over the TuxMac. Then nothing. I
> >>>had to
> >>>manually eject the floppy from the drive.
> >>
> >>What we need would be a way to get a log of it or something.
> >
> >I'll try booting from open-firmware directly on a serial console.
> >It may take a couple of trys. I've never done that before on a
> >Mac (On a Sun/sparc machine, it's standard operating procedure,
> >and I've got lots of experience with Suns -- so it's not
> >completely unexplored teritory!) Maybe there will be some
> >console messages that will be helpful.
>
> Well... Try one gives no help.
>
> I booted my PowerMac 6500 with "Cmd-Opt-O-F" keys, while watching
> the 6500's "modem" serial port on another machine running MacOS-9
> with MacKermit at 38400 bps. I found myself talking to the Open
> Firmware monitor on the 6500, as expected. I was able to do a
> couple of the exercises in Apple Tech Note 1061 ("Fundamentals of
> Open Firmware, part I: The User Interface"). I was feeling
> encouraged... so I typed "boot" with the floppy disk in the drive.
> It read the floppy. Nothing appeared on the serial console.
> Peeking at the monitor on the 6500, all I saw there was a black
> screen. Eventually, the floppy reading noises stopped, but still
> nothing on the serial console and nothing on the 6500's monitor. I
> waited a while. No change.
You have to give the kernel the console=ttyS1,<speed> option so the console
goes to serial log. I don't know how this is done for a miboot floppy though.
> I've been warned by someone at work that the Linux Kernel may
> change the console's bit-rate to either 19200 or 9600 bits/sec.
> And once the reading noises stop, it does seem that the console has
> switched to 19200, because at that speed, things I type on it are
> echoed coherently -- at any other speed, things I type are
> garbled. But all it does is echo what I type. It does nothing
> useful that I can see. In particular, there are no error or
> debug/progress messages of any kind.
See above.
> Sigh!
>
> Is there some kind of a boot-time parameter that one can set to
> tell the Linux Kernel to print verbose debugging progress messages
> on the serial console?
Yes. I do : boot vmlinuz console=ttyS01,115200n8 for example, but you would
both have to identify the actyal ttyS and the speed (19200) and the the way to
tell the kernel about that.
> While I'm asking, does anyone know how to tell the Macintosh Open
> Firmware monitor to set the terminal speed. I'm thinking that if
> the Linux Kernel wants 19200, then it would be a good idea to be
> talking to the Open Firmware at the same speed, so things don't get
> lost in the switch-over.
Best is to adapt the linux kernel serial log to the OF set value though.
Friendly,
Sven Luther
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
