Package: installation-reports INSTALL REPORT
Debian-installer-version: Aug. 18, 2004. I got businesscard CD image for i386 from http://www.debian.org/devel/debian-installer/ uname -a: Linux hou 2.6.7-1-k7 #1 Thu Jul 8 06:45:35 EDT 2004 i686 GNU/Linux Date: Aug. 18, 2004 around 9PM to 10PM CST Method: I booted off from the CD I made from the above businesscard CD image. My APT pointed at: #deb http://mirrors.kernel.org/debian/ sarge main deb http://mirrors.kernel.org/debian/ testing main No proxy. I chose to install 'Desktop Enviroment' Machine: self-built. Processor: AMD Athlon(tm) Processor stepping 01 (800M) Memory: 512MB Root Device: WDC WD205AA, ATA DISK drive; hda Root Size/partition table: Root Size is 180.9M. DISK capacity 20GB. Mount point size Partition fs Win2K 6,200 M #1 Primary NTFS /boot 82.2M #3 Primary ext3 Extended -------- Win2K 5,200 M #5 Logical NTFS /fat32 600.4M #6 Logical fat32 /usr 3,500 M #7 Logical ext3 /var 1,600 M #8 Logical ext3 /tmp 600.4M #9 Logical ext3 /home 1,600 M #12 Logical ext3 swap 797.8M #11 Logical swap / 180.9M #10 Logical ext3 ---fstab: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda10 / ext3 defaults,errors=remount-ro 0 1 /dev/hda3 /boot ext3 defaults 0 2 /dev/hda6 /fat32 vfat defaults 0 2 /dev/hda12 /home ext3 defaults 0 2 /dev/hda9 /tmp ext3 defaults 0 2 /dev/hda7 /usr ext3 defaults 0 2 /dev/hda8 /var ext3 defaults 0 2 /dev/hda11 none swap sw 0 0 /dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 Output of lspci and lspci -n: $ lspci 0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25) 0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01) 0000:00:04.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) 0000:00:06.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10) 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 1b) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 0e) 0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 20) 0000:01:05.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01) $ lspci -n 0000:00:00.0 0600: 1022:7006 (rev 25) 0000:00:01.0 0604: 1022:7007 (rev 01) 0000:00:04.0 0401: 1274:1371 (rev 08) 0000:00:06.0 0200: 1186:1300 (rev 10) 0000:00:07.0 0601: 1106:0686 (rev 1b) 0000:00:07.1 0101: 1106:0571 (rev 06) 0000:00:07.2 0c03: 1106:3038 (rev 0e) 0000:00:07.4 0c05: 1106:3057 (rev 20) 0000:01:05.0 0300: 102b:0521 (rev 01) Base System Installation Checklist: [O] = OK Initial boot worked: [Y] Configure network HW: [Y] Config network: [Y] Detect CD: [Y] Load installer modules: [Y] Detect hard drives: [Y] Partition hard drives: [Y] Create file systems: [Y] Mount partitions: [Y] Install base system: [Y] Install boot loader: [Y] Reboot: [Y] Comments/Problems: Installation has never been so easy. It configured my networking and X windowing automatically. Wonderful job!!! Thanks. -- Xiaobo Peng -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
