Package: installation-reports
INSTALL REPORT
Debian-installer-version: 2004-08-08 netboot iso
uname -a: Linux Kryton 2.6.7-1-686 #1
Date: 2004-08-09
Method: network, netinst cd, ftp.cz.debian.org, no
Machine: SiS chipset
Processor: AMD-K6
Memory: 64MB
Root Device: IDE, /dev/hda2
Root Size/partition table:
#df
Filesystem Size Used Avail Use% Mounted on
/dev/hda2 60G 2,8G 58G 5% /
Output of lspci and lspci -n:
#lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 5591/5592
Host (rev 02)
0000:00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513
[IDE] (rev d0)
0000:00:01.0 ISA bridge: Silicon Integrated Systems [SiS]
SiS85C503/5513 (LPC Bridge) (rev 01)
0000:00:01.1 ff00: Silicon Integrated Systems [SiS] ACPI
0000:00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
PCI-to-PCI bridge (AGP)
0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems
[SiS] 86C326 5598/6326 (rev 0b)
#lspci -n
0000:00:00.0 0600: 1039:5591 (rev 02)
0000:00:00.1 0101: 1039:5513 (rev d0)
0000:00:01.0 0601: 1039:0008 (rev 01)
0000:00:01.1 ff00: 1039:0009
0000:00:02.0 0604: 1039:0001
0000:00:0a.0 0200: 10ec:8139 (rev 10)
0000:00:0b.0 0200: 10ec:8139 (rev 10)
0000:01:00.0 0300: 1039:6326 (rev 0b)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [ ] partially, see bellow
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
One big problem was that as you can see in lspci output, i have two
identical network cards with realtek chipset. Correct driver for
them is 8139too.
But with installed kernel one card had 8139too module and second one
8139cp and didn't work. After compiling and installing my own kernel
everything work's fine. Friend of me has same problem with RC1
installer.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
There can be warning on the first page of partmen, that we cannot
boot from lvm disk!
Don't like exim in base system.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
