Package: installation-reports INSTALL REPORT
Debian-installer-version: 42729472 Aug 10 22:37 sarge-i386-businesscard-1.iso uname -a: Linux desktop 2.4.26-1-k7 #1 Thu Jul 22 13:24:02 JST 2004 i686 GNU/Linux Date: 15 aug 2004, 20:00 Method: network install, atapi CDROM, mirror debian.essentkabel.com, no proxy. Machine: bits and pieces Processor: AMD K7 Memory: 384MB Root Device: IDE (maxtor) on /dev/hda7 Root Size/partition table: Disk /dev/hda: 30.7 GB, 30735581184 bytes 255 heads, 63 sectors/track, 3736 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 153 1228941 b W95 FAT32 /dev/hda2 154 3736 28780447+ f W95 Ext'd (LBA) /dev/hda5 * 154 535 3068383+ 83 Linux /dev/hda6 536 596 489951 82 Linux swap /dev/hda7 597 1123 4233096 83 Linux /dev/hda8 1124 1378 2048256 c W95 FAT32 (LBA) /dev/hda9 1379 3225 14835996 b W95 FAT32 /dev/hda10 3226 3378 1228941 1b Hidden W95 FAT32 /dev/hda11 3379 3736 2875603+ 83 Linux This install uses /dev/hda6 (swap) and /dev/hda7 (root) Output of lspci: 0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25) 0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01) 0000:00:03.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) 0000:00:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 0000:00:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 0000:00:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 15) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 06) 0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 10) 0000:00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) 0000:01:05.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [ ] Comments/Problems: GRUB fails to install on /dev/fd0 (same for (fd0) notation). - Syslog: Aug 15 21:08:07 grub-installer: info: Installing grub on '/dev/fd0' Aug 15 21:08:07 grub-installer: info: grub-install supports --no-floppy Aug 15 21:08:07 grub-installer: info: Running chroot /target /sbin/grub-install --no-floppy "/dev/fd0" Aug 15 21:08:07 grub-installer: error: Running 'grub-install --no-floppy "/dev/fd0"' failed. Aug 15 21:08:09 main-menu[294]: WARNING **: Configuring 'grub-installer' failed with error code 1 Aug 15 21:08:09 main-menu[294]: WARNING **: Menu item 'grub-installer' failed. - Executing grub-install from shell (chroot /target /sbin/grub-install /dev/fd0) gave: /dev/fd0 does not have any corresponding BIOS drive. - I booted an existing install on hda5 and mounted hda7, but same problem. - Then changed device.map to include fd0 (workaround?) original /boot/grub/device.map: (hd0) /dev/hda changed /boot/grub/device.map: (hd0) /dev/hda (fd0) /dev/fd0 - This worked (/dev/hda7 mounted to /dock): debian:/# chroot /dock /sbin/grub-install /dev/fd0 Installation finished. No error reported. This is the contents of the device map /boot/grub/device.map. Check if this is correct or not. If any of the lines is incorrect, fix it and re-run the script `grub-install'. (hd0) /dev/hda (fd0) /dev/fd0 - Reboot went fine. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
