Package: installation-reports INSTALL REPORT
Debian-installer-version: RC1 2004-08-10 from mirror.direct.ca uname -a: Linux orion 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686 GNU/Linux Date: 2004-08-10 Method: netinst CD than dhcp and grabbed from mirror.direct.ca Machine: Clone Processor: P3 866 Memory: 512 Root Device: 3ware Escalade 7006-2 w/ 2 * Seagate 7200.7 80 GB HDD Root Size/partition table: sda1 / BOOT Primary Linux ReiserFS 1003.49 sda2 SWAP Primary Linux swap 1003.49 sda5 /tmp Logical Linux ReiserFS 1003.49 sda6 /var Logical Linux ReiserFS 3997.49 sda7 /usr Logical Linux ReiserFS 3997.49 sda8 /root Logical Linux ReiserFS 1003.49 sda9 /home Logical Linux ReiserFS 10001.95 sda10 /var/www Logical Linux ReiserFS 39999.54 Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 05) 0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05) 0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05) 0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 05) 0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05) 0000:00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 05) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] 0000:02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:02:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) 0000:02:0c.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01) 0000:00:00.0 0600: 8086:1130 (rev 02) 0000:00:01.0 0604: 8086:1131 (rev 02) 0000:00:1e.0 0604: 8086:244e (rev 05) 0000:00:1f.0 0601: 8086:2440 (rev 05) 0000:00:1f.1 0101: 8086:244b (rev 05) 0000:00:1f.2 0c03: 8086:2442 (rev 05) 0000:00:1f.3 0c05: 8086:2443 (rev 05) 0000:00:1f.4 0c03: 8086:2444 (rev 05) 0000:01:00.0 0300: 1002:5159 0000:02:0a.0 0200: 10ec:8139 (rev 10) 0000:02:0b.0 0200: 10b7:9200 (rev 78) 0000:02:0c.0 0104: 13c1:1001 (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: I tried this with a Promise TX2000 Controller and had one hell of a time. The standard IDE was detected but no show for the /dev/ideraid/d0 that I got under the old boot floppies (bf2.4, which don't detect the array on the TX2000 anyways, a 2.4.27 with the bf2.4 kernel config does detect though) Popped in the 3ware 7006-2 (should have started with that, but live and learn) and everything worked like a charm. I have also built a P3 450 off the RC1 discs with no issues. No strange hardware or configs for that one. Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
