----- Forwarded message from andrew <[EMAIL PROTECTED]> ----- From: andrew <[EMAIL PROTECTED]> Date: Tue, 03 Aug 2004 11:56:45 +0200 To: Joey Hess <[EMAIL PROTECTED]> Subject: Re: Bug#262874: Package: installation-reports User-Agent: Mozilla Thunderbird 0.6 (Windows/20040502)
Hi Joey, booting the linux26 kernel didn't help (or at least didnt discover it automagically) maggie:~# lspci 00:00.0 Host bridge: Intel Corp.: Unknown device 2578 (rev 02) 00:03.0 PCI bridge: Intel Corp.: Unknown device 257b (rev 02) 00:1c.0 PCI bridge: Intel Corp.: Unknown device 25ae (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 0a) 00:1f.0 ISA bridge: Intel Corp.: Unknown device 25a1 (rev 02) 00:1f.2 IDE interface: Intel Corp.: Unknown device 25a3 (rev 02) 00:1f.3 SMBus: Intel Corp.: Unknown device 25a4 (rev 02) 01:01.0 Ethernet controller: Intel Corp.: Unknown device 1075 02:04.0 SCSI storage controller: Galileo Technology Ltd.: Unknown device 5041 (rev 03) 03:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 03:0a.0 Ethernet controller: Intel Corp.: Unknown device 1076 maggie:~# Using woody with a 2.6.7 kernel ... libata version 1.02 loaded. ata_piix version 1.02 ata_piix: combined mode detected ata: 0x170 IDE port busy PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14 ata1: dev 0 cfg 49:2f00 82:346b 83:5b01 84:4003 85:3469 86:1801 87:4003 88:207f ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix Vendor: ATA Model: WDC WD800JD-00HK Rev: 13.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda4 < sda5 sda6 sda7 sda8 sda9 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Regards, Andrew Joey Hess wrote: >Andrew Miehs wrote: > > >>Package: installation-reports >> >>Debian-installer-version: SARGE BETA 4, 30-AUG-2004 >>uname -a: booted 2.6 kernel >>Date: >>Method: CD-ROM Install >> >>Machine: Supermicro SuperServer SS5013C-MT >>Processor: 3.2GHz P4 >>Memory: 2G >>Root Device: SATA ICH5 >>Root Size/partition table: >>Output of lspci: >> >>Base System Installation Checklist: >> >>Initial boot worked: [O] >>Configure network HW: [O] >>Config network: [O] >>Detect CD: [O] >>Load installer modules: [O] >>Detect hard drives: [E] >>Partition hard drives: [ ] >>Create file systems: [ ] >>Mount partitions: [ ] >>Install base system: [ ] >>Install boot loader: [ ] >>Reboot: [ ] >>[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it >> >>Comments/Problems: ICH5 Driver not included in standard kernel. All >>motherboards seem to have this as their on-board SATA driver nowerdays. >> >> > >The ICH5 is supported by the ata_piix driver which is included in >current builds of the installer, though perhaps not beta4, and only if >you boot into the 2.6 kernel with "linux26". If it is not automatically >loaded by a current build then please write back with the lspci and >lspci -n information that you left out of your installation report, so >we can add it to the PCI id database. > > > ----- End forwarded message ----- -- see shy jo
signature.asc
Description: Digital signature
