Package: installation-reports
INSTALL REPORT
Debian-installer-version: beta4
uname -a:
Linux Helmi 2.4.25-1-386 #2 Wed Apr 14 19:38:08 EST 2004 i686
GNU/Linux
Date: 24.7.2004
Method:
How did you install?
I used net install (and aptitude).
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i38
6-netinst.iso
What did you boot off?
I burned the image on CD and booted from it.
If network install, from where?
http://http.us.debian.org/debian testing main contrib non-free
Proxied?
Nope
Machine: Octek Rhino
Processor: AMD 1.6 GHz
Memory: 512 DDR RAM
Root Device: IDE /dev/hdc2
Root Size/partition table:
hdc1 Boot Primary W95 FAT32 (LBA) 995.26
hdc2 Primary Linux ext3 19485.69
hdd1 Primary W95 FAT32 (LBA) 123519.03
Output of lspci and lspci -n:
pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP]
0000:00:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
0000:00:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
0000:00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1
(rev 04)
0000:00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 01)
0000:00:0c.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev
10)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 1b)
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 1b)
0000:00:11.4 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 1b)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 30)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti
200] (rev a3)
--------------------------------------------------------------------------
pcilib: Cannot open /sys/bus/pci/devices
0000:00:00.0 Class 0600: 1106:3099
0000:00:01.0 Class 0604: 1106:b099
0000:00:08.0 Class 0400: 109e:036e (rev 11)
0000:00:08.1 Class 0480: 109e:0878 (rev 11)
0000:00:09.0 Class 0401: 1102:0002 (rev 04)
0000:00:09.1 Class 0980: 1102:7002 (rev 01)
0000:00:0c.0 Class 0200: 1186:1300 (rev 10)
0000:00:11.0 Class 0601: 1106:3074
0000:00:11.1 Class 0101: 1106:0571 (rev 06)
0000:00:11.2 Class 0c03: 1106:3038 (rev 1b)
0000:00:11.3 Class 0c03: 1106:3038 (rev 1b)
0000:00:11.4 Class 0c03: 1106:3038 (rev 1b)
0000:00:11.5 Class 0401: 1106:3059 (rev 30)
0000:01:00.0 Class 0300: 10de:0201 (rev a3)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [ ]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
I liked the installing system. I think it's much more better and easier to
use than installing stable version of woody.
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to [EMAIL PROTECTED]
--
Eero Kaipiainen
Opiskelija / Student
Tietojenkäsittelytieteen laitos / Department of Computer Science
Helsingin yliopisto / Helsinki University (Finland)
