On Thu, Jul 08, 2004 at 12:28:21PM +0200, Finn-Arne Johansen wrote:
> On Thu, Jul 08, 2004 at 12:29:20PM +0300, Pasi Kärkkäinen wrote:
> > On Wed, Jul 07, 2004 at 06:17:38PM +0200, Finn-Arne Johansen wrote:
> > > On Wed, Jul 07, 2004 at 11:07:24AM -0400, Joey Hess wrote:
> > > > Pasi Kärkkäinen wrote:
> > > > > "Unable to install GRUB in (hd0)
> > > > > Executing 'grub-install (hd0)' failed.
> > > > > This is a fatal error"
> > > > >
> > > > > and in the console 3:
> > > > >
> > > > > "Probing devices to guess BIOS drives. This may take a long time.
> > > > > /dev/ida/c0d0p2 does not have any corresponding BIOS drive."
> > > > >
> > > > > that c0d0p2 looks weird.. there's no such device in /dev/ida/.
> > > >
> > > > grub-install is running in the /target chroot, and you should indeed
> > > > have a /target/dev/ida/c0d0p2; that's the standard name for this device.
> > >
> > > When grub install fails the first time, do a
> > > echo "(hd0) /dev/ida/c0d0" >> /target/boot/grub/device.map
> > >
> > > Then retry the grub install, and see if it solves your problem.
> > >
> >
> > Yep, that helped. After echoing that to device.map, I chrooted myself to
> > /target, and ran grub-install hd0. After this grub loads fine when I boot up
> > the system.
> >
> > > > > I also tried booting with a grub floppy, and then manually booting using the
> > > > > installed kernel from the second partition of the disk.. kernel panics
> > > > > because it cannot mount root (because the cpqarray driver is not loaded..).
> > > > I'd suggest you file a bug on initrd-tools about this. It should
> > > > presumably include such drivers in the initrd.
> > >
> >
> > Hmm.. any ideas how to manually add the cpqarray driver to initrd? I still
> > cannot boot up the system, because the driver is not loaded during boot and
> > because of that the root-fs cannot be mounted..
>
> Add the a line to /etc/mkinitrd/modules conatining
> cpqarray
>
That did the trick. I booted using the netinst CD, mounted the installed
partitions from the hd, chrooted inside them, edited the /etc/mkinitrd/modules,
recreated the mkinitrd image, reinstalled grub, and now the system boots up
fine from the hd.
Thanks.
Now, it would be nice if this was done automatically :)
-- Pasi Kärkkäinen
^
. .
Linux
/ - \
Choice.of.the
.Next.Generation.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
