Ok, there is the result of the command :Apal wrote:0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 01) 0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 01) 0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 01)0000:00:1d.0 Class 0c03: 8086:2482 (rev 01) 0000:00:1d.1 Class 0c03: 8086:2484 (rev 01) 0000:00:1d.2 Class 0c03: 8086:2487 (rev 01) I tried again, and it happen with the "normal" install as with the "linux26" install. Do you need to know any other things to fix this ? Thanks.Yes, there is one other peice of info we need. We need to know which usb modules to load for these three PCI ids. If you can: - boot the installer into the normal (2.4) mode - switch to the shell console with alt-f2 and log in with Enter - modprobe usb-ohci ; modprobe usb-uhci ; modprobe ehci-hcd - grep hci /proc/bus/pci/devices | cut -f 2,18 - send us the output of the above grep/cut command
80862482 usb-uhci
80862484 usb-uhci
80862487 usb-uhci
Only the modprobe usb-uhci detected a device. The others said No such device.
