Package: installation-reports
Debian-installer-version: downloaded June 3, 2004 from http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/tc1/sarge-i386-netinst.iso uname -a: Linux galdo 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686 GNU/Linux Date: June 4, 2004, 8 am to 10 am (local time: Paris) Method: boot on freshly burnt RW CD (110Mo). no proxy.
Machine: HP NX9005 laptop Processor: AMD Athlon 2400+ Memory:708Mo RAM (460Mo recognized) Root Device: Toshiba MK3021GAS, ide Root Size/partition table: 30Go /dev/hda3 ext3 4316Mo / (linux system) /dev/hda5 vfat 17994Mo /home/jrouquie/windows (my data) /dev/hda6 swap 346Mo none (swap) /dev/hda? ntfs ~5000Mo (windows system)
Output of lspci: pcilib: Cannot open /sys/bus/pci/devices 0000:00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13) 0000:00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 01) 0000:00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 0000:00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02) 0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] 0000:00:08.0 Modem: ALi Corporation Intel 537 [M5457 AC-Link Modem] 0000:00:09.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01) 0000:00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01) 0000:00:0a.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev 01) 0000:00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) 0000:00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) 0000:00:11.0 Bridge: ALi Corporation M7101 PMU 0000:00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 0000:01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1 0000:04:00.0 USB Controller: NEC Corporation USB (rev 43) 0000:04:00.1 USB Controller: NEC Corporation USB (rev 43) 0000:04:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
Base System Installation Checklist:
Initial boot worked: [O] Configure network HW: [ ] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems: Great work ! I was afraid of installing Debian, but the installation went good and easy. Thanks ! Dual boot with windows. I got the known bug of keybord not responding and used the classic workaround of repeatedly pressing caps-lock while booting for the installation. I didn't tried all the devices (usb, wifi, ...). cdrom fails to eject under kde (read fine), I didn't tried to fix the problem.
Thanks again,
Jean-Baptiste Rouquier.
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
