Package: installation-reports
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso
downloaded 2004-06-07 13:29 uname -a: Linux new-master 2.6.3-1-386 #2 Tue Feb 24 20:20:23 EST 2004 i686 GNU/Linux Date: 2004-06-08 18:00 GMT Method: From the CD Image listed above then http from ftp.uk.debian.org apt source
Machine: Intel ServerBoard SE7501WV2 intel Intel Chassis built by Pars
Technology
Processor: 2*2.66 Xeons
Memory: 2GB
Root Device: <IDE? SCSI? Name of device?>
Root Size/partition table: <Feel free to paste the full partition
table, with notes on which partitions are mounted where.>
Filesystem Size Used Avail Use% Mounted on
/dev/hda1 1.8G 62M 1.6G 4% /
tmpfs 443M 0 443M 0% /dev/shm
/dev/hda3 37G 33M 35G 1% /home
/dev/hda5 897M 8.1M 841M 1% /tmp
/dev/hda6 46G 117M 44G 1% /usr
/dev/hda7 56G 94M 53G 1% /varsee error report below after repeating mount -a we get
Filesystem Size Used Avail Use% Mounted on /dev/hda1 1.8G 62M 1.6G 4% / tmpfs 443M 0 443M 0% /dev/shm /dev/hda3 37G 33M 35G 1% /home /dev/hda5 897M 8.1M 841M 1% /tmp /dev/hda6 46G 117M 44G 1% /usr /dev/hda7 56G 94M 53G 1% /var /dev/sda1 1.8G 8.1M 1.7G 1% /maint /dev/sdb1 1.8G 8.1M 1.7G 1% /maint2 /dev/sdb2 3.7G 33M 3.5G 1% /local
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01)
0000:00:00.1 Class ff00: Intel Corp. E7000 Series Host RASUM Controller (rev 01)
0000:00:03.0 PCI bridge: Intel Corp. E7000 Series Hub Interface C PCI-to-PCI Bridge (rev 01)
0000:00:03.1 Class ff00: Intel Corp. E7000 Series Hub Interface C RASUM Controller (rev 01)
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
0000:01:0c.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
0000:02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
0000:02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
0000:02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
0000:03:07.0 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
0000:03:07.1 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
0000:04:07.0 SCSI storage controller: Adaptec AIC-7902 U320 (rev 03)
0000:04:07.1 SCSI storage controller: Adaptec AIC-7902 U320 (rev 03)
Base System Installation Checklist:
Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
So far so good, then the problems start.
The aic79xx driver isn't loaded until after checkfs has run, thus failing to check and then mount the scsi drives.
Choose to install package manually via apt rather than any of the semi automatic methods.
After the system has finished and presented me with a login prompt I installed ssh then reboot the system (typing reboot at root prompt) and the box just gets as far as saying "Restarting System" and hangs there. Not much good on a server I want to mount miles away from anyone to press reset.
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
