Package: installation-reports
INSTALL REPORT
Debian-installer-version: daily i386 20040525
uname -a:
Linux kourou 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 i686 GNU/Linux
Date: 26. may 2004 ~11h
Method: netboot.iso, not proxied via serial cable.
Machine: AMD 800 with Via mainboard
Processor:
Memory: 128 mb
Root Device: ide - Maxtor 81280A2
Root Size/partition table: root 90MB hda1,
lvm2 1.1 GB hda5 (/home, /tmp, /usr, /var)
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 10)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev
10)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev
10)
0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio
Controller (rev 20)
0000:00:09.0 Ethernet controller: 3Com Corporation 3c900B-TPO [Etherlink XL TPO] (rev
04)
0000:00:0d.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O] 1)
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O] 2)
Comments/Problems:
daily image very nice, seems quite close to a rc.
some minor glitches or wishlists:
1) was my first time lvm usage on d-i:
as shown above i wanted 2 partitions for the hard disc
one for root and the other for lvm.
* maybe i was to quick first, but i choose format the partion
for both the partitions, had overseen the "use for lvm".
when trying to configure lvm it let my do, but it had
of course no physical volume!
perhaps a check for a pv should be made before allowing
volume groups to be made?
* when deleting the lvm partition, the physical volume,
all the already created volume/physical groups related
to it won't be deleted.
* a menu entry for "list volume/physical groups" would be very nice.
at the moment you have to go to delete to see which you already created.
2) as my install was via serial cable i would appreciate that
grub/lilo (used default grub) contain the boot args that
were initially typed in: console=ttyS0,115200
on reboot they were lost
thanks a lot for your work and good luck for rc1.
a++ maks
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
