Numerous error messages at boot: JEDEC: Found no ICH2 rom device at location zero
Stopped the error messages by adding a line to /etc/discover-modprobe.conf skip ="ich2rom" lspci: 0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03) 0000:00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 82) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DB (ICH4) LPC Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801DB (ICH4) Ultra ATA 100 Storage Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 02) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 02) 0000:01:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01) lspci -n: 0000:00:00.0 Class 0600: 8086:2560 (rev 03) 0000:00:02.0 Class 0300: 8086:2562 (rev 03) 0000:00:1d.0 Class 0c03: 8086:24c2 (rev 02) 0000:00:1d.1 Class 0c03: 8086:24c4 (rev 02) 0000:00:1d.2 Class 0c03: 8086:24c7 (rev 02) 0000:00:1d.7 Class 0c03: 8086:24cd (rev 02) 0000:00:1e.0 Class 0604: 8086:244e (rev 82) 0000:00:1f.0 Class 0601: 8086:24c0 (rev 02) 0000:00:1f.1 Class 0101: 8086:24cb (rev 02) 0000:00:1f.3 Class 0c05: 8086:24c3 (rev 02) 0000:00:1f.5 Class 0401: 8086:24c5 (rev 02) 0000:01:09.0 Class 0200: 14e4:4401 (rev 01) Hope this helps, Joe Hester -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
