Package: installation-reports Debian-installer-version: 4-10-04 i386 http://www.debian.org/devel/debian-installer/
uname -a: Linux atilla 2.4.25-1-686 #1 Tue Feb 24 10:55:59 EST 2004 i686 GNU/Linux Date: 4-11-04 Method: floppies/network ftp.debian.org expert mode Machine: Compaq Deskpro Processor: Celeron 400 Mhz Memory: 64M system 256M swap Root Device: IDE /dev/hda1 Root Size/partition table: Filesystem Size Used Avail Use% Mounted on /dev/hda1 179M 104M 66M 62% / /dev/hda2 805M 25M 738M 4% /home /dev/hda3 905M 171M 686M 20% /var /dev/hdb2 1.9G 1.3G 456M 75% /usr Output of lspci: lspci pcilib: Cannot open /sys/bus/pci/devices 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (r ev 03) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 0000:00:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) 0000:00:0e.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01) 0000:00:14.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:14.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:14.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:14.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/ 2X (rev 5c) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: It was a beautiful installation all the way down to grub. I had to build a new kernel right away to get wireless working as the 2.4.25 doesn't have CONFIG_NET_RADIO enabled but is necessary to build the hostap driver. glenn greenfield -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
