Package: installation-reports Debian-installer-version: <Version 3. 19 March 2004 downoaded from debian.org> uname -a: <2.4.> Date: <March 19 afternoon GMT> Method: <Net install off business card cd. Through networked DSL. Machine: Fujitsu siemens Business PC. Standard Intel motherboard. Intel 810 chipset. PIII 933 Coppermine. Currently writing this on a windows PC while Processor: Memory: Root Device: <IDE Samsung 20GB hard drive. Root Size/partition table: Chose single 20GB partition. ext3 Output of lspci: Base System Installation Checklist: Initial boot worked: [o ] Configure network HW: [o ] Config network: [o] Detect CD: [o] Load installer modules: [o ] Detect hard drives: [o ] Partition hard drives: [o ] Create file systems: [o ] Mount partitions: [o ] Install base system: [o ] Install boot loader: [o ] Reboot: [o ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Using expert mode tried to install 2.6 kernel. Variously. Tried 2.6.4-1.i686 which downloaded but there were problems loading pcmcia modules for this kernel version. This is a PC not inn need of PCMCIA. Rebooted. ried to install 2.6.4-1.i386. Seemed to work except that it just decided to download/install 2.4.24 instead. Chose normal install. Chose to just boot to base system, not choosing extra packages during install. At root prompt ran apt-get install kde Went off and did its stuff including downloading xfree86 but nothing configured. Rather than attempting to configure. Running install again using tasksel desktop environment.
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
