Package: installation-reports Debian-installer-version: sarge-i386-netinst.iso uname -a: 2.4.25-1-386 Date: march 26. 2004 Method: boot device cd-rom
Machine: VIA EPIA ME6000 (on board viedo, lan, sound) Processor: VIA Samuel 2 ---- cat /proc/cpuinfo processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 599.914 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow bogomips : 1196.03 ---- Memory: 512MB Root Device: IDE seagate barracuda (120GB) Root: ---- Disk /dev/hda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 19457 156288321 5 Extended /dev/hda5 1 61 489919+ 83 Linux /dev/hda6 62 85 192748+ 82 Linux swap /dev/hda7 86 328 1951866 83 Linux /dev/hda8 329 450 979933+ 83 Linux /dev/hda9 451 572 979933+ 83 Linux /dev/hda10 573 645 586341 83 Linux /dev/hda11 646 1861 9767488+ 83 Linux /dev/hda12 1862 3077 9767488+ 83 Linux /dev/hda13 3078 15202 97394031 83 Linux /dev/hda14 15203 19457 34178256 83 Linux ---- /dev/hda6 none swap sw 0 0 /dev/hda11 / reiserfs defaults 0 1 ---- Output of lspci: ---- 00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266] 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 50) 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 00:14.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03) ---- Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: langues and keymap: i'am swiss (german speaking part). i choose Deutsch (Schweiz) keymap Schweizerdeutsch (Swiss (German)). btw: unusual translation we speak swiss german (Schweizerdeutsch) but we write german, our keyboards are "Schweiz (Deutsch)" or "Schweiz (Französisch)" equal keyboard but the configuration is different for the keys [öé],[äà],[üè]: in the german speaking part: [öé]->ö and shift+[öe]->é [äà]->ä .. [üè]->ü .. in the franch speaking part: [öé]->é and shift+[öé]->ö . . after the installation the special character didn't work (backslash, umlaut). i run dpkg-reconfigure console-data (choose keymap swiss german) and dpkg-reconfigure locales (choose de_CH).
