Package: installation-reports Debian-installer-version: 17th march 2004 from http://gluck.debian.org/cdimage/testing/sarge_d-i/ uname -a: Linux gordon 2.6.4 #1 Thu Mar 18 14:48:08 CET 2004 i686 GNU/Linux Date: Thursday 18th march 2004 at about 15h Method: Install with the sarge beta3 cd, and after other packages by apt-get
Machine: Asus A7V333-RAID, many hd (240 gigs), Geforce 4 ti 4200, Creative Audigy etc... Processor: Athlon XP 1900+ Memory: 512 DDR PC 2100 Root Device: hde3, IDE from the RAID Controler (Promise PDC20276) Root Size/partition table: Disk /dev/hde: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hde1 * 1 6403 51432066 c W95 FAT32 (LBA) <-- which will be deleted soon :) /dev/hde2 6404 6468 522112+ 82 Linux swap /dev/hde3 6469 9726 26169885 83 Linux Disk /dev/hdg: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdg1 1 14593 117218241 c W95 FAT32 (LBA) Disk /dev/hdh: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdh1 1 4865 39078081 c W95 FAT32 (LBA) Output of lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] 00:06.0 RAID bus controller: Promise Technology, Inc. PDC20276 IDE (rev 01) 00:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 00:09.0 USB Controller: VIA Technologies, Inc. USB (rev 50) 00:09.1 USB Controller: VIA Technologies, Inc. USB (rev 50) 00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) 00:0d.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03) 00:0d.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03) 00:0d.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port 00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) 00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23) 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23) 01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti 4200] (rev a3) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: All works great and my RAID Controler (Promise Technology, Inc. PDC20276 IDE) is now detected ! The woody setup didn't find this controler and with sarge installer with 2.4.25, it rox ! Great job ! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
