Package: installation-reports
Severity: normal
Debian-installer-version: 22/03/2004 - beta3 i386 floppy from d-i pages
uname -a: Linux neige 2.4.25-1-k7 #1 Tue Feb 24 14:2428 EST 2004 i686 GNU/Linux
Date: 22/03/2004 10h00
Method: Network installation with (boot and root) floppies
If network install, from where?
ftp.belnet.be via http
Proxied?
yes
Machine: N/A
Processor: Athlon 1.4
Memory: 256MB
Root Device: IDE hda (Western Digital WDC WD300BB-00CCB0)
Root Size/partition table:
Disk /dev/hda: 30.0 GB, 30020272128 bytes
255 heads, 63 sectors/track, 3649 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 2550 20482843+ c W95 FAT32 (LBA)
/dev/hda2 2551 3650 8833766 5 Extended
/dev/hda5 2551 2945 3172806 83 Linux root /
/dev/hda6 2946 2970 200781 82 Linux swap
/dev/hda7 2971 3650 5460115+ 83 Linux /home
hda{5,6,7} already formatted (and format was well recognized)
Output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
(rev 10)
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 18)
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 18)
00:11.4 USB Controller: VIA Technologies, Inc. USB (rev 18)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [ ]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't
try it
Comments/Problems:
Everything was OK during the installation, but the retrieving of the
package for the base system. I mistype the name of the proxy
during the configuration, and I have not been asked again for entering
the proxy name. As a consequence, the download always failed...
So, in case of error during this download, the user should be prompted
again in order to give the good information.
Thanks for your job,
Olivier
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.4.25-neige+mga+usb
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (ignored: LC_ALL set to [EMAIL PROTECTED])
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
