Package: installation-reports
Debian-installer-version: 100 MB CD image, downloaded 17-03-2004 from
d-i homepage
uname -a: did not try
Date: 22-03-2004, 11:00 local time
Method: Booted of SCSI CD-ROM, 100 MB CD image with base system
Machine: Compaq Proliant 800
Processor: Dual Pentium Pro 200 MHz
Memory: 64 MB
Root Device: RAID, /dev/ida/disk0/part1, configuration RAID 5.
Root Size/partition table:
Disk /dev/ida/disc0/disc: 6308 MB, 6308789760 bytes
255 heads, 63 sectors/track, 767 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id
System
/dev/ida/disc0/part1 6 767 6120765 83 Linux
/dev/ida/disc0/part3 1 5 40131 12
Compaq diagnostics
Partition table entries are not in disk order
Disk /dev/ida/disc1/disc: 9103 MB, 9103687680 bytes
255 heads, 32 sectors/track, 2179 cylinders
Units = cylinders of 8160 * 512 = 4177920 bytes
Device Boot Start End Blocks Id
System
/dev/ida/disc1/part1 1 123 501824 82 Linux
swap
/dev/ida/disc1/part2 124 2179 8388480 83 Linux
Output of lspci:
(From RH9, previously installed)
00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC [Natoma] (rev 02)
00:08.0 PCI bridge: IBM IBM27-82351 (rev 01)
00:0a.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W
[Millennium] (rev 01)
00:10.0 Network controller: Compaq Computer Corporation Integrated
NetFlex-3/P (rev 10)
00:14.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II]
(rev 01)
00:14.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
01:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev
04)
01:07.0 Ethernet controller: 3Com Corporation 3c595 100BaseTX [Vortex]
01:09.0 PCI bridge: IBM IBM27-82351 (rev 03)
02:00.0 Unknown mass storage controller: Compaq Computer Corporation
Smart-2/P RAID Controller (rev 03)
Base System Installation Checklist:
Initial boot worked: [0]
Configure network HW: [0]
Config network: [0]
Detect CD: [0]
Load installer modules: [0]
Detect hard drives: [0]
Partition hard drives: [0]
Create file systems: [0]
Mount partitions: [0]
Install base system: [E]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
D-I failed to install the kernel, i got the following error:
/usr/sbin/mkinitrd: constituent device /dev/ida/disc0/part1 does not
exist
Failed to create initrd image.
dpkg: error processing kernel-image-2.4.25-1-386 (--configure):
subprocess post-installation script returned error exit status 1
Errors were encountered while processing:
kernel-image-2.4.25-1-386
E: Sub-process /usr/bin/dpkg returned an error code (1)
I guess a bug in devfs or mkinird caused the problem. RH installation
worked fine.
Keep up de good work!
Kind regards,
Jop Bezuijen
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
