Package: installation-reports Debian-installer-version: Install Beta 3 downloaded from http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/beta3/sarge-i386-netinst.iso
uname -a: Date: 19.03.2004 Method: I tried to install from the Beta 3 Netinst ISO File. At boot prompt I startet only with pressing the enter-key. I wanted to install via Net, over my router Machine: Asus M2400N Processor: 1.6Ghz Centrino Memory: 512 MB Shared Ram, only accessable about 500MB Root Device: IDE /dev/hda1 60 GB Root Size/partition table: Command (m for help): Disk /dev/hda: 60.0 GB, 60011642880 bytes 255 heads, 63 sectors/track, 7296 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 523 4200966 7 HPFS/NTFS /dev/hda2 524 7296 54404122+ f W95 Ext'd (LBA) /dev/hda3 2091 2092 16064+ 83 Linux /dev/hda5 * 524 980 3670821 83 Linux /dev/hda6 981 1633 5245191 83 Linux /dev/hda7 1634 2090 3670821 83 Linux /dev/hda8 2093 2158 530113+ 82 Linux swap /dev/hda9 2159 4125 15799896 b W95 FAT32 /dev/hda10 4126 7294 25454961 83 Linux /dev/hda11 7295 7296 16033+ 14 Hidden FAT16 <32M Command (m for help): Output of lspci: this is the output from my working Debian Testing! 00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02) 00:00.1 System peripheral: Intel Corp.: Unknown device 3584 (rev 02) 00:00.3 System peripheral: Intel Corp.: Unknown device 3585 (rev 02) 00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03) 00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 03) 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83) 00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corp. 82801DBM Ultra ATA Storage Controller (rev 03) 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio Controller (rev 03) 00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 03) 01:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9) 01:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9) 01:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 01) 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:05.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [E] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: There was a problem with partioning my harddisk. My harddrive was partioned with the Acronis Bootseltor tool, which can also partion a hardisk. Once a time I moved and resized my partions with this tool. So the install-program didn't find any existing partition. I did not want to kill all datas on this disk, so I abourt the installation. On my old PIII 600 I tried the Beta 3 also till I came to the partition point. On this maschine is also Acronis Bootselektor running, but theres no problem with the hardisk. Maybe there could be any difference, because on the PIII I also boot from Acronis Bootselektor, on my Laptop (the PC this install-report belongs to) Lilo is the choice to select the operating system. I wanted to install via net with my Orinoco Wavelan PCMCI WLAN card. Detecting this tool worked very well. ifconfig was ok, and pinging from another pc worked. -- GPG Key: http://homepages.hs-bremen.de/~sabe/gpg/SaschaBerkenkamp.gpg -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
