Package: installation-reports
INSTALL REPORT
Debian-installer-version: d-i beta 2 from gluck
uname -a: Linux metta 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686
GNU/Linux
Date: Wed Mar 3 16:27:46 CET 2004
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
I used the 100 MB netinst-Image to boot from CD, which I put in the
CD-burner.
Machine: <Description of machine (eg, IBM Thinkpad R32)>
Processor: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Memory: 511MB LOWMEM available.
Root Device: /dev/hda
Root Size/partition table: Feel free to paste the full partition
table, with notes on which partitions are mounted where.
Partition Table for /dev/hda
---Starting--- ----Ending---- Start Number of
# Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors
-- ----- ---- ---- ---- ---- ---- ---- ---- ----------- -----------
1 0x00 1 1 0 0x83 254 63 11 63 192717 /boot
2 0x00 0 1 12 0x82 254 63 133 192780 1959930 swap
3 0x00 0 1 134 0x83 254 63 255 2152710 1959930 /
4 0x00 0 1 256 0x05 254 63 1023 4112640 113177925
5 0x00 1 1 256 0x83 254 63 1023 63 14651217 /home
6 0x00 254 63 1023 0x83 254 63 1023 63 14651217 /usr
7 0x00 254 63 1023 0x83 254 63 1023 63 9767457 reserved
for /tmp
8 0x00 254 63 1023 0x83 254 63 1023 63 66412647 /data
Output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8374 P4X400 Host
Controller/AGP Bridge (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235
AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev
74)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS330
[Xabre] PCI/AGP VGA Display Adapter (rev 01)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
0. Selecting Network device
Luckily I knew from my last system on this PC, which NIC was eth0 and eth1.
1. Select Partitions as mount-points
As I had my HD already partitioned, I just wanted to select the appropriate
mount points. As one can see in the partition table, I selected partition 1
for /boot. In the next step I selected partition 2 and said "Dateisystem
beibehalten" (keep filesystem). After that "/boot" was shown in the
partition list for partition 2.
2. Selecting device for lilo
The explaining text said something about choosing between a partition or a
device, but how can one know, what are valid values to type in the field?
3. reboot-window
It's a nice idea to eject the CD before the reboot. But mine was not in the
DVD-ROM, as the installer obviously assumed, but in the CD-burner. Isn't it
possible to detect from where the running system was booted as KNOPPIX does
it?
The rest of the install was really easy. Thanks a lot for the good work!
Holger
--
+++ NEU bei GMX und erstmalig in Deutschland: TÜV-geprüfter Virenschutz +++
100% Virenerkennung nach Wildlist. Infos: http://www.gmx.net/virenschutz
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
