Il dom, 2004-03-14 alle 03:38, David Nusinow ha scritto: [...] > > My wifi card (airport) wasn't detected but wifi tools were installed. I did a > > modprobe airport in tty2 and then configured via DHCP the network. > > Could you please send the output of lspci and lspci -n? The correct > module to load is airport, correct?
The module is airport, that depends on orinoco and hermes. The output you requested is attached. Bye, Giuseppe
00:0b.0 Host bridge: Apple Computer Inc. UniNorth 1.5 AGP 00:10.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 01) 10:0b.0 Host bridge: Apple Computer Inc. UniNorth 1.5 PCI 10:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03) 10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB 10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB 10:1a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02) 24:0b.0 Host bridge: Apple Computer Inc. UniNorth 1.5 Internal PCI 24:0e.0 Class ffff: Lucent Microelectronics FW323 (rev ff) 24:0f.0 Class ffff: Apple Computer Inc. UniNorth GMAC (Sun GEM) (rev ff) 00:0b.0 Class 0600: 106b:002d 00:10.0 Class 0300: 1002:4c66 (rev 01) 10:0b.0 Class 0600: 106b:002e 10:17.0 Class ff00: 106b:0022 (rev 03) 10:18.0 Class 0c03: 106b:0019 10:19.0 Class 0c03: 106b:0019 10:1a.0 Class 0607: 104c:ac50 (rev 02) 24:0b.0 Class 0600: 106b:002f 24:0e.0 Class ffff: 11c1:5811 (rev ff) 24:0f.0 Class ffff: 106b:0021 (rev ff)
