Hi The problem is that the image that is placed on the ramdisk under installation has become larger than 8192 Kb. You can work around this by applaying: linux ramdisk_size=16384on the boot-prompt.
Håvard > Identical problem here. Soltek SL-75KAV/-X MB, AMD Duron 1300 MHz. > > Phil. > > On Wed, 10 Mar 2004, david wrote: > >> Hi, >> Whilst trying to cold boot from CD1 of build 20040306 the following >> error >> overwrites itself (forever) >> "Attempted to access bejond end of device 1:00 rw=0 want=820, limit >> 8192" at least that my best guess as it is very hard to read. The 820 >> appears to cycle through to 824. >> This is on 'bottom of the garden hardware" with a 120G drive >> containing >> 10x 20G partitions. >> After the splash screen there are about 3 screens of response >> messages - >> the last one being about a RAMDISK before the screen becomes a flash >> of letters as above. >> >> Best Regards david.. >> -- >> >> >> -- >> To UNSUBSCRIBE, email to [EMAIL PROTECTED] >> with a subject of "unsubscribe". Trouble? Contact >> [EMAIL PROTECTED] >> >> >> > > -- > Philip Charles; 39a Paterson Street, Abbotsford, Dunedin, New Zealand > +64 3 488 2818 Fax +64 3 488 2875 Mobile 025 267 9420 > [EMAIL PROTECTED] - preferred. [EMAIL PROTECTED] I > sell GNU/Linux & GNU/Hurd CDs. See http://www.copyleft.co.nz > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
