Package: installation-reports
INSTALL REPORT
Debian-installer-version: 20040305 daily build
uname -a:
Linux ditest 2.4.24-1-386 #1 Wed Feb 18 19:44:56 EST 2004 i686 GNU/Linux
Date: Sun Mar 7 13:49:21 EST 2004
Method:
Booted from CDROM, installed onto a brand spanking new hard disk. All HTTP
access was transparently proxied.
Machine: Noname clone
Processor: Intel Pentium IV
Memory: 256M
Root Device: IDE, /dev/hdb1
Root Size/partition table:
Disk /dev/hdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 1 62 497983+ 83 Linux
/dev/hdb2 63 124 498015 82 Linux swap
/dev/hdb3 125 14593 116222242+ 8e Linux LVM
Filesystem Type Size Used Avail Use% Mounted on
/dev/hdb1 ext3 494M 54M 416M 12% /
/dev/base/home
ext3 2.2G 34M 2.0G 2% /home
/dev/base/tmp ext3 2.2G 34M 2.0G 2% /tmp
/dev/base/usr ext3 2.2G 134M 1.9G 7% /usr
/dev/base/var ext3 2.2G 91M 2.0G 5% /var
tmpfs tmpfs 132M 0 132M 0% /dev/shm
Output of lspci:
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 12)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 12)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev
b2)
03:00.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
03:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
03:02.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Looking good guys. This was an install run at medium priority, and the only
issue that I had was the first choice of partitioning was totally screwed, I
had to bail back to the main menu and choose the other partitioning option.
Slightly niggling issue was it seemed to do hardware detection at a lot of
steps, and actually presented some silly dialogs for detecting the networkd
device, for example. It included my CDROM drive in the list. In all instances
I just accepted the defaults and everything went swimmingly.
The issue with LVM appears to be resolved (lvmcfg now does install lvm10 and
friends into the new installation) and the fact that devfs is in the kernel but
devfs is not mounted does not seem to be an issue.
Cosmetically, I noticed that there's no graphical boot splash again :-(
The kernel choosing stuff selected a non 686 optimised kernel for me. I'm sure
previous installs have selected a more appropriate kernel image.
Final nitpick is that in the base-config, when it came to selecting my mirror,
defaulted to the United States, even though I'd well and truly specified Iw
was in Australia by now. I think the timezone stuff worked well, other than
the fact that Canberra is omitted (no biggy, it is the same timezone as Sydney
I just don't live in Sydney).
Otherwise, all was good!
Andrew
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
