Below information that was sended to me private. With this message it is filed to the bugreport, it contains the pci IDs and a pointer to the driver of the array controller.
Cheers Geert Stappers ----- Forwarded message from beu <[EMAIL PROTECTED]> ----- From: beu <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] (Geert Stappers) Subject: Re: Bug#234887: Net install over HP ProLiant DL360 G3 Date: Fri, 27 Feb 2004 11:53:24 +0100 X-Mailer: Netscape Webmail Hi... Sorry. Excuse my lack of precision. I'll try to be clear this time. Now from the beginning... Package: installation-reports INSTALL REPORT Debian-installer-version: 2004-02-27 http://www.debian.org/devel/debian-installer/ uname -a: Linux ns 2.4.22-1-386 #9 Sat Oct 14:30:39 EST 2003 i686 unknown Date: 2004-02-27 Method: net install (no proxie) and the system don't go until I can choose apt source list Machine: HP ProLiant DL360 G3 Processor: Xeon Memory: 1GB Root Device: U320 SCSI HP Smart Array 5i (RAID 0,1) Root Size/partition table: Doesn't work right Output of lspci: (Using Linux Morphix 2.4.21-xfs #13 SMP Tue Aug 26 01:46:14 CEST 2003 i686 GNU/Linux) lspci output 00:00.0 Host bridge: ServerWorks CNB20-HE Host Bridge (rev 32) 00:00.1 Host bridge: ServerWorks CNB20-HE Host Bridge 00:00.2 Host bridge: ServerWorks CNB20-HE Host Bridge 00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 00:04.0 RAID bus controller: Compaq Computer Corporation Smart Array 5i/532 (rev 01) 00:05.0 System peripheral: Compaq Computer Corporation: Unknown device b203 (rev 01) 00:05.2 System peripheral: Compaq Computer Corporation: Unknown device b204 (rev 01) 00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93) 00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) 00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05) 00:0f.3 Host bridge: ServerWorks GCLE Host Bridge 00:11.0 Host bridge: ServerWorks: Unknown device 0101 (rev 05) 00:11.2 Host bridge: ServerWorks: Unknown device 0101 (rev 05) 01:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet (rev 02) 04:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet (rev 02) lspci -n output 00:00.0 Class 0600: 1166:0014 (rev 32) 00:00.1 Class 0600: 1166:0014 00:00.2 Class 0600: 1166:0014 00:03.0 Class 0300: 1002:4752 (rev 27) 00:04.0 Class 0104: 0e11:b178 (rev 01) 00:05.0 Class 0880: 0e11:b203 (rev 01) 00:05.2 Class 0880: 0e11:b204 (rev 01) 00:0f.0 Class 0601: 1166:0201 (rev 93) 00:0f.1 Class 0101: 1166:0212 (rev 93) 00:0f.2 Class 0c03: 1166:0220 (rev 05) 00:0f.3 Class 0600: 1166:0225 00:11.0 Class 0600: 1166:0101 (rev 05) 00:11.2 Class 0600: 1166:0101 (rev 05) 01:02.0 Class 0200: 14e4:16a7 (rev 02) 04:02.0 Class 0200: 14e4:16a7 (rev 02) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: First of all, excuse my english. I'm spanish. It seems that the new HP ProLiant DL360 G3 has changed the Compact Smart Array 5i disk controller for the new HP Smart Array 5i, and the second is lightly incompatible with te first one. In fact, the installation process detects the Compaq controller (insted of HP controller) but it can't make it work. So, therefore may be in some way incompatible. Adittional information: The process goes until "Installing the kernel package kernel-image-2.4.22-1-386" after forcing the "Automatically partition hard drives" because I can't make it manually. The error message is: Unable to install the selected kernel. An error was returned while trying to install the kernel into the target system. Kernel package: 'kernel-image-2.4.22-1-386' This is probably a fatal error. You might try to select the kernel installation step again on the main menu. That will allow you to select another kernel to install OK, but no other kernel is available to select from the menu, this is the only one. Device recognized: /dev/cciss/disc0/disc (Compaq Smart Array/ 34728MB) I've found informarion about the real driver at http://opensource.hp.com/opensource_projects.html and follow the link 'CCISS Driver for Linux' that goes to http:// sourceforge.net/projects/cciss Here are sources for different kernel versions (including 2.4.22) but I´ve never compile the kernel and still less from an uncomplete system :( I hope all this information will be usefull ----- Mensaje Original ----- De: [EMAIL PROTECTED] (Geert Stappers) Fecha: Jueves, Febrero 26, 2004 2:28 pm Asunto: Re: Bug#234887: Net install over HP ProLiant DL360 G3 > On Thu, Feb 26, 2004 at 01:12:55PM +0100, beu wrote: > > Package: installation-reports > > > > INSTALL REPORT <snip what="62 lines"/> ----- End forwarded message ----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
