Package: installation-reports INSTALL REPORT
Debian-installer-version: gluck daily netinst, 2004-02-19 uname -a: n/a Date: 2004-02-19 Method: Booted from CDROM Machine: Powermac G5 Desktop Processor: 2 x ppc 970 @ 2.0GHz Memory: 4G Root Device: Maxtor 250G SATA drive Root Size/partition table: n/a Output of lspci: In mac-speak: http://www.acc.umu.se/~maswan/debian/g5-hardware.txt Relevant part, I think: PCI/AGP Cards: ATY,R350: Type: display Bus: AGP Slot: SLOT-1 VRAM (Total): 128 MB Vendor: ATI (0x1002) Device ID: 0x4e48 Revision ID: 0x0000 ROM Revision: 113-A14401-116 ATY,Rocket_A: Type: display Display Type: LCD VRAM (In Use): 128 MB ATY,Rocket_B: Status: No display connected Base System Installation Checklist: Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Does not give any output after "opening display" with a string indicating the graphics card referenced above. /Mattias Wadenstein -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
