Package: installation-reports Debian-installer-version: 2004-02-17 http://gluck.debian.org/cdimage/testing/sarge_d-i/i386/beta2/sarge-i386-netinst.iso uname -a: Linux <host> 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686 unknown Date: 2004-02-17 15:17 GMT Method: Boot from CD, network install
Machine: Compaq DL380 G2 Processor: Intel Pentium III 1266MHz Memory: 512MB Root Device: Compaq Smart Array 5i Root Size/partition table: Name Blocks Type /dev/cciss/disc0/part1 36k Compaq Diagnostics /dev/cciss/disc0/part2 975k Linux /dev/cciss/disc0/part3 975k Linux swap /dev/cciss/disc0/part5 1954k Linux /dev/cciss/disc0/part6 4936k Linux Output of lspci: Too long to retype here Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [E] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Up to the filesystem creation, it works very well. On the "Configure and mount partitions" section, the partition list is incorrect and selecting any partition takes me back to the main menu. Example partition list follows: d0 952 MiB ntfs 952 MiB n/a 1.9 GiB n/a 4.7 GiB n/a 7.8 GiB ntfs Finish Abort I'm unsure what the d0 is supposed to be, but the first "952 MiB ntfs" partition does not exist. The "7.8 GiB ntfs" partition *does* exist on another logical drive on the array, on separate drives. Regards, -- Peter Nelson | http://www.bucks.net | Systems Administrator | Tel: +44 1296 432486 | Bucks Net | Fax: +44 1296 398795 | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
