Package: installation-reports
Version: 20040215
INSTALL REPORT
Debian-installer-version:
http://people.debian.org/~joeyh/d-i/images/2004-02-15/floppy/
Date: 15 Feb 2004
Method: Boot from floppies, packages from local network
Machine: Home assembled PC
Processor: AMD Athlon(tm) XP 2200+ 1800 MHz
Memory: 256 MB
Root Device: IDE (hda)
Output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge (rev80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0f.0 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. USB (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3227
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio
Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP8x]
(rev a4)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O] (there is none)
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [E]
Create file systems: []
Mount partitions: []
Install base system: []
Install boot loader: []
Reboot: []
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Detect hardware seemed go well, but I could not found /dev/hda or
/dev/ide/*
This is third installation test with same computer. First succeeded
(reported 18 Dec 2003 14:49:35 +0200). Second time lilo installation
failed (reported 09 Feb 2004 02:01:04 +0200). Now I could not access
hard disc at all. Not a promising trend:(
I don't need modules from floppy
mirror info manually 192.168.0.2/testing OK
Fetching files OK
Detect hardware OK
Partition a hard drive - flash and back to the menu, same line
alt-F4 gives: <http://www.iki.fi/~jkn/error.jpg>
Hard-disk is already partitioned, but 'configure and mount partitions'
reports: "No partitions were found in your system..."
I booted: bios finds hda and tries to boot. Lilo fails with 'L 01'
(Disk had a Linux earlier and previous boot-floppies tried to instal
lilo, but failed.
- Jukka
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
