Package: installation-reports

INSTALL REPORT

Debian-installer-version: beta 2 netinst cd
uname -a: Linux debian 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686 GNU/Linux
Date: Feb 12 2004
Method: How did you install? netinst CD
What did you boot off? CD
If network install, from where? Proxied? no


Machine: Dell Latitude C600
Processor: P3 750 MHz
Memory: 256 MB
Root Device: IDE /dev/hda3
Root Size/partition table:  Feel free to paste the full partition
      table, with notes on which partitions are mounted where.

/dev/hda3 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)


Disk /dev/hda: 20.0 GB, 20003880960 bytes 255 heads, 63 sectors/track, 2432 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1        2167    17406396    c  W95 FAT32 (LBA)
/dev/hda2   *        2168        2198      249007+  82  Linux swap
/dev/hda3            2199        2432     1879605   83  Linux


Output of lspci:


00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:03.0 CardBus bridge: Texas Instruments PCI1420
00:03.1 CardBus bridge: Texas Instruments PCI1420
00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
00:08.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator (rev 10)
00:10.0 Ethernet controller: 3Com Corporation 3c556 Hurricane CardBus (rev 10)
00:10.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem (rev 10)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)




Base System Installation Checklist:

Initial boot worked:    [o]
Configure network HW:   [o]
Config network:         [o]
Detect CD:              [o]
Load installer modules: [o]
Detect hard drives:     [o]
Partition hard drives:  [o]
Create file systems:    [o]
Mount partitions:       [o]
Install base system:    [o]
Install boot loader:    [o]
Reboot:                 [o]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

<Description of the install, in prose, and any thoughts, comments
      and ideas you had during the initial install.>

Installation was successful. Picked up the 3com onboard ethernet and ESS
sound chip fine.

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to [EMAIL PROTECTED]



-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]



Reply via email to