Eric Bus <[EMAIL PROTECTED]> a écrit : | I used apt-get to install kernel-image-2.4.24-1-686. When you get the | LILO (or GRUB) configuration screen, press ALT-F2, Enter (which will | give you an linux prompt). Type 'apt-get install | kernel-image-2.4.24-1-686' (or change 686 to another arch if you're | using a pre-PentiumIII machine). It should download and install the | kernel.
I intervene in this thread as I ran into the same problem. First, I had to do a chroot /target before I can run apt-get (or else: error while loading shared libraries). Then, apt-get install kernel-image-2.4.23-1-686 installs and sets up cramfsprogs and initrd-tools, but fails at configuring kernel-image-*. Here is what I get: error reading /lib/modules/2.4.23-1-686/build: No such f. or d. Deleting /lib/same_path/build /usr/sbin/mkinitrd: /dev/fd does not exist Failed to create initrd image Same problem with 2.4.22. For info, I do not have a floppy drive. Next, if I try to continue installation and install lilo, it fails. I can read things like "modprobe: failed to load vga-stuff" but it blinks too quickly. That reminds me of one thing: in early stage of installation (hardware detection), I encountered a "modprobe ide-detect failed" (or was it ide-disk? Can't remember exactly) Could that be unusual/related? Thanks for any help, and regards. -- Daniel Déchelotte http://yo.dan.free.fr/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]