INSTALL REPORT Debian-installer-version: sarge-alpha-netinst.iso 20040109 uname -a: n/a Date: 2004-01-09 23:45 Method: CD boot via SRM console Machine: Microway AlphaPC 164SX Processor: Alpha 21164 533 MHz Memory:384MB Root Device: /dev/hdd2 Root Size/partition table:
Disk /dev/hdd: 10.2 GB, 10262568960 bytes 16 heads, 63 sectors/track, 19885 cylinders Units = cylinders of 1008 * 512 = 516096 bytes 3 partitions: # start end size fstype [fsize bsize cpg] a: 25 98 74 swap swap b: 99 1247 1149 ext2 / c: 1 1247 1247 unused 0 0 Output of lspci: 00:05.0 USB Controller: NEC Corporation USB (rev 41) 00:05.1 USB Controller: NEC Corporation USB (rev 41) 00:05.2 USB Controller: NEC Corporation USB 2.0 (rev 02) 00:06.0 PCI bridge: Digital Equipment Corporation DECchip 21050 (rev 02) 00:08.0 ISA bridge: Contaq Microsystems 82c693 00:08.1 IDE interface: Contaq Microsystems 82c693 00:08.2 IDE interface: Contaq Microsystems 82c693 00:08.3 USB Controller: Contaq Microsystems 82c693 00:09.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II] 01:00.0 Ethernet controller: Digital Equipment Corporation DECchip 21040 [Tulip] (rev 23) 01:01.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 01) 01:02.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 01) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: After the past few days of borked images, today's image worked marvelously well. srm-reader is still broken, but shouldn't be for long. Support for the qlogicisp controller still causes hardware hangs, but I wasn't using the SCSI functionality on this card, so rm'ing the module from the initrd let me sneak past this stage without enduring DEBCONF_PRIORITY=low. Everything else worked fine until the end, when the installer picked the wrong kernel (bug in kernel-installer, picking a default from the available list) and, er, "neglected" to install the bootloader because there's no aboot-installer package available. These two bugs both have straightforward fixes. :-) -- Steve Langasek postmodern programmer
signature.asc
Description: Digital signature
