On Thu, Dec 25, 2003 at 12:42:21PM +0100, Martin Michlmayr wrote: > * Nowicki Christophe <[EMAIL PROTECTED]> [2003-12-25 10:18]: > > I've tried to install Debian GNU/Linux sarge on an server with a Promise > > FastTrack Raid Card (Model : FastTrak TX2000) : > > > Is this common RAID array controller supported by the new debian-installer ? > > Can you please post the output of "lspci" and "lspci -n". Of course :
<2> <ttypts/1> [Tue Dec 30 10:45:23] [EMAIL PROTECTED]:/home/client 0>lspci 00:00.0 Host bridge: Intel Corp.: Unknown device 2570 (rev 02) 00:02.0 VGA compatible controller: Intel Corp.: Unknown device 2572 (rev 02) 00:1d.0 USB Controller: Intel Corp.: Unknown device 24d2 (rev 02) 00:1d.1 USB Controller: Intel Corp.: Unknown device 24d4 (rev 02) 00:1d.2 USB Controller: Intel Corp.: Unknown device 24d7 (rev 02) 00:1d.3 USB Controller: Intel Corp.: Unknown device 24de (rev 02) 00:1d.7 USB Controller: Intel Corp.: Unknown device 24dd (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev c2) 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24d0 (rev 02) 00:1f.1 IDE interface: Intel Corp.: Unknown device 24db (rev 02) 00:1f.2 IDE interface: Intel Corp.: Unknown device 24d1 (rev 02) 00:1f.3 SMBus: Intel Corp.: Unknown device 24d3 (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24d5 (rev 02) 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10) 01:07.0 RAID bus controller: Promise Technology, Inc.: Unknown device 6269 (rev 02) 01:08.0 Ethernet controller: Intel Corp.: Unknown device 1050 (rev 02) It's a shuttle box : http://www.materiel.net/details_SB62G2.html <3> <ttypts/1> [Tue Dec 30 10:45:29] [EMAIL PROTECTED]:/home/client 0>lspci -n 00:00.0 Class 0600: 8086:2570 (rev 02) 00:02.0 Class 0300: 8086:2572 (rev 02) 00:1d.0 Class 0c03: 8086:24d2 (rev 02) 00:1d.1 Class 0c03: 8086:24d4 (rev 02) 00:1d.2 Class 0c03: 8086:24d7 (rev 02) 00:1d.3 Class 0c03: 8086:24de (rev 02) 00:1d.7 Class 0c03: 8086:24dd (rev 02) 00:1e.0 Class 0604: 8086:244e (rev c2) 00:1f.0 Class 0601: 8086:24d0 (rev 02) 00:1f.1 Class 0101: 8086:24db (rev 02) 00:1f.2 Class 0101: 8086:24d1 (rev 02) 00:1f.3 Class 0c05: 8086:24d3 (rev 02) 00:1f.5 Class 0401: 8086:24d5 (rev 02) 01:06.0 Class 0200: 10ec:8139 (rev 10) 01:07.0 Class 0104: 105a:6269 (rev 02) 01:08.0 Class 0200: 8086:1050 (rev 02) Interesting thinks from /var/log/dmesg : Linux version 2.4.22-1-686 ([EMAIL PROTECTED]) (gcc version 3.3.2 20030908 (Debian prerelease)) #6 Sat Oct 4 14:09:08 EST 2003 ... Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide: late registration of driver. ICH5: IDE controller at PCI slot 00:1f.1 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio ICH5-SATA: IDE controller at PCI slot 00:1f.2 ICH5-SATA: chipset revision 2 ICH5-SATA: 100% native mode on irq 18 ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:DMA ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio PDC20271: IDE controller at PCI slot 01:07.0 PDC20271: chipset revision 2 PDC20271: not 100% native mode: will probe irqs later ide4: BM-DMA at 0xa400-0xa407, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0xa408-0xa40f, BIOS settings: hdk:pio, hdl:pio hdb: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive hdi: Maxtor 6Y120P0, ATA DISK drive blk: queue e0028910, I/O limit 4095Mb (mask 0xffffffff) hdk: Maxtor 6Y120P0, ATA DISK drive blk: queue e0028d64, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide4 at 0x9400-0x9407,0x9802 on irq 19 ide5 at 0x9c00-0x9c07,0xa002 on irq 19 hdi: attached ide-disk driver. hdi: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=238216/16/63, UDMA(133) hdk: attached ide-disk driver. hdk: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=238216/16/63, UDMA(133) Partition check: /dev/ide/host4/bus0/target0/lun0: [PTBL] [14946/255/63] p1 p2 < p5 p6 p7 p8 > /dev/ide/host4/bus1/target0/lun0: [PTBL] [14946/255/63] p1 p2 < p5 p6 p7 p8 > Highpoint HPT370 Softwareraid driver for linux version 0.02 ataraid/d0: p1 p2 < p5 p6 p7 p8 > Drive 0 is 117246 Mb (56 / 0) Drive 1 is 117246 Mb (57 / 0) Raid1 array consists of 2 drives. Promise Fasttrak(tm) Softwareraid driver for linux version 0.03beta ... It'a standard debian kernel package : kernel-image-2.4.22-1-686. During the install process I saw /dev/ide/host4/bus0/target0/lun0 and /dev/ide/host4/bus1/target0/lun0 but not /dev/ataraid/d0 :( > > > I've setup a RAID 1 array with two hard drives. > > But during the installation process I didn't see my ATA RAID array. > > I saw my two hard drives. > > But those hard drives are connected to the Promise controller? Yep of course :) I made a "cross install" with debootstrap from a knoppix live cd :( This installation was not user friendly :( I will install another server with this card in few week so I can provide you a full d-i debug output :) Thanks a lot -- Meuuuhh elle fait la vache :)) _(__)_ Nowicki Christophe '-e e -'__,--.__) 17, rue Saint Exupery (o_o) ) 77500 Chelles \. /___. | Etudiant EPITECH Promo 2006 ||| _)/_)/ http://etud.epita.fr/~nowick_c/nowick_c.asc //_(/_(/_(
signature.asc
Description: Digital signature
