Package: installation-reports Severity: normal Attached report from template.
-- System Information: Debian Release: testing/unstable Architecture: i386 Kernel: Linux illuvatar 2.4.22-1-686 #6 Sat Oct 4 14:09:08 EST 2003 i686 Locale: LANG=en_US, LC_CTYPE=en_US
Package: installation-reports INSTALL REPORT Debian-installer-version: 2003-11-22 (From a mirror whose URL I cannot recall, md5sum is: b25da613bbcceffa79077d3a3eb50c4c uname -a: Linux localhost 2.4.22-1-k7 #5 Sat Oct 4 14:11:12 EST 2003 i686 GNU/Linux Date: 2003-11-23 Method: Installed from the 113 MB netinst ISO via DVD+/-RW drive with Sarge CDROM set for additional packages. Machine: eMachines S2485 Processor: AMD Athlon 2400+ Memory: 512 MB Root Device: IDE hdd at /dev/hda Root Size/partition table: (output from fdisk -l /dev/hda) Disk /dev/hda: 81.9 GB, 81964302336 bytes 255 heads, 63 sectors/track, 9964 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System location /dev/hda1 * 1 62 497983+ 83 Linux / /dev/hda2 63 186 996030 82 Linux swap /dev/hda3 187 684 4000185 83 Linux /usr /dev/hda4 685 9964 74541600 83 Linux /home Output of lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 00:0a.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01) 00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 50) 01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] Base System Installation Checklist: Initial boot worked: [O ] Configure network HW: [O ] Config network: [ O] Detect CD: [ O] Load installer modules: [O ] Detect hard drives: [ O] Partition hard drives: [ O] Create file systems: [ O] Mount partitions: [ O] Install base system: [O ] Install boot loader: [ O] Reboot: [ O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: The installer improperly set up device names for the DVD+/-RW device. It correctly set up ide_scsi emulation for the drive, but did not set up the device names right. /dev/cdrom -> /dev/cdrom0 -> /dev/scd0. But, /dev/scd0 is not where ide_scsi sets up my cdrom. /dev/sr0 is the right place. The system hostname was not established properly. I named my machine "office-linux", but instead it was named "localhost". I'm not actually sure how to fix this. Simply changing /etc/hostname was not the right solution.
