Package: installation-reports
INSTALL REPORT
Debian-installer-version: 2003-11-16
uname -a: Linux durham 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i586 GNU/Linux
Date: Thu Nov 20 18:33:49 CET 2003
Method:
- How did you install?
netinst sarge minimal CD (113 MB)
- What did you boot off?
The CDRom
- If network install, from where? Proxied?
network from http://http.us.debian.org and nonus
not proxied.
Machine: Custom-made
Processor: AMD K6-2 450
Memory: 256M
Root Device: ide (/dev/hda2)
Root Size/partition table:
Disk /dev/hda: 1246 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/hda1 0+ 15 16- 128488+ 82 Linux swap
/dev/hda2 16 79 64 514080 83 Linux
/dev/hda3 80 1245 1166 9365895 5 Extended
/dev/hda4 0 - 0 0 0 Empty
/dev/hda5 80+ 207 128- 1028128+ 83 Linux
/dev/hda6 208+ 233 26- 208813+ 83 Linux
/dev/hda7 234+ 259 26- 208813+ 83 Linux
/dev/hda8 260+ 412 153- 1228941 83 Linux
/dev/hda9 413+ 1245 833- 6691041 83 Linux
Output of lspci:
00:00.0 Host bridge: ALi Corporation M1541 (rev 04)
00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev 04)
00:03.0 Bridge: ALi Corporation M7101 PMU
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] (rev c3)
00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
00:0b.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine] (rev 06)
00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c1)
01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model
64 Pro] (rev 15)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [ ]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Problems with cdrom player that could not be accessed at reboot.
Since ide-scsi is compiled in, /etc/fstab should refer to /dev/sr0 instead
of /dev/hdX. A change in /etc/fstab fixed it.
Sometimes, at reboot, my DFE-530-TX rev A1 is not recognized and via-rhine
gives "Invalid MAC address for card #0". Booting from a potato CD never gives
this problem...
Thomas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
