Package: installation-reports
Version: N/A; reported 2003-11-15
Severity: wishlist
Package: installation-reports
INSTALL REPORT
Debian-installer-version: beta1
uname -a: Linux localhost 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i586 GNU/Linux
Date: 14.Nov.2003 23:00 EST-2
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
- > Installed from CDROM. The system would not boot from the CD so I
had to use the sbm image to be able to do so.
Machine: AMD
Processor: AMD K6/2 500MHz
Memory: 192MB
Root Device: /dev/hda
Root Size/partition table:
Disk /dev/hda: 6505 MB, 6505712640 bytes
255 heads, 63 sectors/track, 790 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 4 32098+ 83 Linux
/dev/hda2 5 35 249007+ 82 Linux swap
/dev/hda3 36 790 6064537+ 83 Linux
/dev/hda3 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/hda1 on /boot type ext2 (rw)
Output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47)
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
00:0a.0 Unknown mass storage controller: Promise Technology, Inc. 20268 (rev 01)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 03)
Base System Installation Checklist:
Initial boot worked: [F]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
The initial hardware detection is performed 3 or 4 times.
The keyboard setting is never asked.
Some debconf questions are so big the choices are displayed in a one-line
output, so the user might not realize there are several options.
The network is configured fine. The system, however, does not have a proper
network name. Now is called simply localhost.
Nothing more I can think off.
mooch
-- System Information
Debian Release: 3.0
Architecture: i386
Kernel: Linux reypastor 2.4.21 #1 vie jun 13 22:28:10 CEST 2003 i686
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED]
--
Jesus Climent info:www.pumuki.org
Unix SysAdm|Linux User #66350|Debian Developer|2.4.22|Helsinki Finland
GPG: 1024D/86946D69 BB64 2339 1CAA 7064 E429 7E18 66FC 1D7F 8694 6D69
There are only two possible explanations: either no one told me,...
or no one knows.
--Neo (Matrix Reloaded)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
