On 18 Feb 2003, Owen B. Mehegan wrote:
> Sure -
>
> I added these two lines near the top of the file:
>
> allow booting;
> allow bootp;
>
> And then added this section at the end:
>
> host laptop {
> filename "/tftpboot/pxelinux.0";
> server-name "pointer";
> next-server pointer;
> hardware ethernet 00:B0:D0:A4:2B:88;
> }
These re PXE bits I've picked up too:
# PXE stuff
# Definition of PXE-specific options
# Code 1: Multicast IP address of bootfile
# Code 2: UDP port that client should monitor for MTFTP responses
# Code 3: UDP port that MTFTP servers are using to listen for MTFTP requests
# Code 4: Number of secondes a client must listen for activity before trying
# to start a new MTFTP transfer
# Code 5: Number of secondes a client must listen before trying to restart
# a MTFTP transfer
option space PXE;
option PXE.mtftp-ip code 1 = ip-address;
option PXE.mtftp-cport code 2 = unsigned integer 16;
option PXE.mtftp-sport code 3 = unsigned integer 16;
option PXE.mtftp-tmout code 4 = unsigned integer 8;
option PXE.mtftp-delay code 5 = unsigned integer 8;
and
class "pxeclients"
{
match if substring (option vendor-class-identifier, 0,
9) = "PXEClient";
option vendor-class-identifier "PXEClient";
# At least one of the vendor-specific option must be set. We set
# the MCAST IP address to 0.0.0.0 to tell the bootrom to still use
# TFTP (address 0.0.0.0 is considered as "no address")
# option PXE.mtftp-ip 192.168.0.1; vendor-option-space
PXE;
option PXE.mtftp-ip 0.0.0.0; vendor-option-space PXE;
filename "/PXE/pxelinux.0";
}
And there's this for the boot roms available from rom-o-matic:
# Filched from http://clic.mandrakesoft.com/documentation/pxe/ch04.html
class "Etherboot"
{
match if substring (option vendor-class-identifier,
0, 13) = "Etherboot-5.0";
option vendor-encapsulated-options
3c:09:45:74:68:65:72:62:6f:6f:74:ff;
option vendor-class-identifier "Etherboot-5.0";
vendor-option-space PXE;
option PXE.mtftp-ip 0.0.0.0;
filename "/tftpboot.ser";
}
--
Cheers
John Summerfield
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
