After trying to do a tft boot network install today and reading through the bug report stuff, here is my summary and suggestion for a way forward.
1. include root.bin in tftpboot.img using mknbi 2. Document booting with pxe and with etherboot The tftpboot.img files are broken, they do not include a root filesystem as aleged in the documentation (11.2.3.1.5), nor is there enough documentation to describe how to load the root filesystem. There seem to be two ways people have proposed to load the root filesystem, either decompress it and export it from an nfs server, or make the root.bin available for loading into ramdisk. I think we can concentrate on documenting the ramdisk method. AFAIK the standard kernels are not able to do NFS root, so that would entail the user building a custom kernel. The only situation where that would be of benefit is the low memory situation. >> The tftpboot.img alone indeed seems not to include a root.bin image. > >No it does not. That is by design, so I'm told. Apparently there is >no standard way to include the root image with the TFTP kernel image. What is the design? It certainly isn't documented. I would suggest, after a little research, that mknbi _is_ the standard way to include the root image on i386. It works with Netboot/Etherboot. For MBA, http://www.ltsp.org/documentation/LTSP-MBA.htm suggests that the mknbi etherboot image is at lease the intermediate step to producing an MBA bootable image. AFAIK from reading the previous posts, there seem to be a large number of methods for network booting which I will catergerize as follows: 1. PXE 2. Etherboot/Netboot 3. grub 4. mba and other boot protocols (for every vendor, another "standard" it seems) My personal bias is that we sould document 1 & 2. I know PXE is just another vendor's protocol, but I think it will be the way of the future. Besides the eepros, I have seen a lots of motherboards with PXE built in lately, high and low end. For those without network cards or mbs with PXE built in though, Etherboot should be documented, because it supports the vast majority of hardware and is really easy to set up with the help of http://rom-o-matic.net/ and a single floppy. (As an aside, as an answer to: >Is it just me, or isn't it rather a crippling problem that etherboot >requires a floppy or other bootable medium to do the etherbooting? I >guess however, since there is no OpenBoot on x86, that's just the >breaks. Well, yes, exactly. It is a royal pain, but if there is no PXE or other boot rom on the network card, what option do we have? The standard bios is not going to help us..... >Tell me, why is it interesting/useful to floppy-boot into etherboot >rather than just floppy-booting from the rescue/root combo? Just the >issue of one floppy vs two? The great thing about an etherboot floppy is that it is about 2K, which makes for much faster boots and less problems with floppy reliability. In my case the machine will be booting this way when installed, so there is an added benefit of easier upgrading of kernels - not need to re-write floppies...) The PXE documentation already submitted is a great, with one extra change. The suggested /tftpboot/pxelinux.cfg/default file should contain: kernel linux.bin instead of kernel tftpboot.img At the moment, of course, they are exactly the same file, but I am suggesting that the tftpboot.img becomes an Etherboot/Netboot specific image. As far as documenting Etherboot goes, the documentation is almost sufficient; with the creation of an etherboot compatable tftpboot.img, very little needs to be added. One such addition could be suggesting that people go to http://rom-o-matic.net/ to get boot floppies/rom images. Apart from that, there is just clarification of the different files and dhcpd setups for the PXE vs etherboot methods: PXE: in dhcpd.conf: filename "/tftpboot/pxelinux.0" in /tftpboot: pxelinux.0 linux.bin root.bin pxelinux.cfg/default Etherboot: in dhcpd.conf: filename "/tftpboot/tftpboot.img" in /tftpboot: tftpboot.img As for grub/MBA/etc I have no direct experience. Others may want to contribute stuff, but I suggest that the Etherboot/Netboot and PXE setups will be most common. my 2c. Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
