On Wed, Jul 10, 2002 at 11:32:54AM +0200, Stephan Marguet wrote: > Hello, > > Luckily I have found a useful web site helping for this very > problem, in case there are any others experiencing similar: > > http://people.debian.org/~bottoms/Debian-VME-PPC.html > > (configuring /etc/inittab and /etc/network should be added to steps) > > But it relies on base2_2.tgz. Perhaps the 3.0 people would be so > kind as to make a base3_0.tgz (the .debs are not as useful for those > with no previous debian installations) for those of us that broken > boot-floppies leave behind?
Well, you can still do the same thing that doc does, you just have to install debootstrap to do it. We just finished putting together instructions for this on the list, check the last few days, or the end result in CVS preparing.sgml. Basically instead of using tar to unpack the tarball, you can use debootstrap to unpack it, or just point debootstrap at a Debian mirror and forget about getting the tarball. debootstrap creates the entire filesystem in its target folder, which in your case would be tftpboot/<ip-address>/ . > > > Stephan Marguet <[EMAIL PROTECTED]> writes: > > > > > We are currently trying to install debian on a diskless MVME 2400 > > > system using the debian boot-floppies you have created. Unfortunately, > > > after the kernel discovers it is on a serial console, bootfull.bin's > > > install prog proceeds rather slowly, at the rate of perhaps 15 chars > > > appearing at once every 10 seconds or so. Is there a way I can eliminate I ran into something similar on a powermac serial install. The serial line was unstable, because OpenFirmware had set the port to 38400 and the kernel default setting was 9600. I added a boot argument to set the kernel to 38400, and things were much better. > > > this problem? Or perhaps I can create my own bootfull.bin using one of > > > our working kernels? Any help/information/documentation you can provide > > > would be much appreciated. We have read everything at > > > ports/powerpc/inst/prep and yet we are still at a loss. boot.bin > > > specifies root=/dev/fd0 and fails when we try to do root=/dev/nfs, > > > nfsroot=, ip=, etc. rescue.bin does not execute, giving illegal error. > > > This is true for both the 2.2 and the 3.0 releases of these files. Thank > > > you in advance for your time and understanding, > > > > Resent this to the debian-boot list. > > > > -- > > ...Adam Di Carlo..<[EMAIL PROTECTED]>...<URL:http://www.onshored.com/> > > > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- *------v--------- Installing Debian GNU/Linux 3.0 --------v------* | <http://www.debian.org/releases/woody/installmanual> | | debian-imac (potato): <http://debian-imac.sourceforge.net> | | Chris Tillman [EMAIL PROTECTED] | | May the Source be with you | *----------------------------------------------------------------* -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
