>> We have a couple of 2650's right now. We were able to get past the >> sym53c416 spot using the 2.4 kernel, but at this point we're looking for >> the gigabit ethernet drivers and correct raid drivers. We can't >> identify the modules we need to get the install completed. > > I guess you need megaraid.o. Extract this file from the drivers.tgz > archive (from the bf2.4 subdirectory), get an msdos floppy disk, create > a directory called "boot" on it and put the module into the directory. > Later, use this floppy in the "Preload essential modules" step.
He need to check if he ordered the cheap PERC3/DI raid chipset or the PERC3/DC raid card. The PERC3/DC is a short card with a memory bank. This one use MegaRAID. The chipset use the Adaptec driver. I've found this on Google concerning the 2650: <<< Got a few of them with dual 2400's and hardware raid. RedHat 7.3 shows it by default with four cpu's because of the hyperthreading, 7.2 needs acpismp=force passed to the kernel at boot to use the hyperthreading. The servers are unbelievably fast. >>> May be will help. Stef... .......................................................... . Linux - Debian - php4 - Apache - MySQL - Infogerance . . email: [EMAIL PROTECTED] - http://www.actionweb.fr . . Tel: (0)141 906 100 - Fax: (0)141 906 101 . .......................................................... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
