Eduard and Chris

Thanks for the help, more details.

>From "cat /proc/version"
  Linux version 2.2.20(herbet@gondolin) (gcc version 2.7.2.3) #1 Mon Dec 31
07:05:08

Machine specs
  Gateway Pentium II  400MHz
  256 MB ram
  IDE 0 ST310212A - (PM)
  IDE 1 QUANTUM Fireball EL10.2A
  BIOS version 4M4PB0X1.15A.0013.P97


I have not booted from linux.bin. Still working on it.

After mounting my swap and ext2 partition, I attempt to create the boot
floppy.  After getting the dbootstrap error message, I went to the console
(ctrl/alt/F2) and looked at dmesg.  Starting at the "Adding Swap: 136512k
swap-space (priority -1)" line there are 4 after it.  All four are : "VFS:
Disk change detected on device fd(2,0)"

In the previous mail, I told you what was in /var/log/messages

I then tried the following mount requests
>mount /dev/fd0 /mnt -t auto  ** worked
>mount /dev/fd0 /mnt -t vfat  ** did NOT work
>mount /dev/fd0 /mnt -t msdos ** worked

Then did:
>chroot /target
>superformat /dev/fd0
  "A CAUTION: The line is drive and controller specific, so it should be
removed before installing a new drive 0 or floppy controller" message is
displayed prior to the formating/verifying cylinder X, head Y output.
  "mformat -s18 -t80 -h2 -S2 -M512 a:" is displayed followed by "sh:
mformat: command not found".

Since there is no mformat under /target, I then exited out of the chroot and
tried
>cd
>/target/usr/bin/superformat /dev/fd0

I got the same CAUTION message and the same mformat command was displayed
but rather than the "command not found" the message "mformat: lazybox no
op".  OK, I tried to do mformat on my own.

>mformat a:
"mformat: lazybox no op" was displayed

Hmmm. mformat is found in /usr/bin.  I've never used mformat before but
after reading the man page, it definitely seems hosed!

What else can I tell you?

Tom
-----Original Message-----
From: Eduard Bloch [mailto:[EMAIL PROTECTED]]On Behalf Of Eduard Bloch
Sent: Thursday, March 28, 2002 1:19 PM
To: Tom Whitcomb; [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Bug#140305: Make a Boot Floppy failes on boot-floppies
version 3.0.21


tags 140305 + moreinfo
thanks

#include <hallo.h>
Tom Whitcomb wrote on Thu Mar 28, 2002 um 09:20:57AM:

> user.info.dbootstrap[256]: formatting floppy with cmd 'export
> LD_LIBRARY_PATH="/target/lib:/target/usr/lib";/target/usr/bin/superformat
> /dev/fd0 hd'

This is normal. Please boot with "linux.bin debug" to see additional
debug messages.

> user.info.dbootstrap[256]: mount: Mounting /dev/fd0 on /floppy failed.  No
> such device

Please go to the second console and do:

 mount /dev/fd0 /mnt -t auto
 mount /dev/fd0 /mnt -t vfat
 mount /dev/fd0 /mnt -t msdos

And tell which did work. Further, try after base system installation:

 chroot /target
 superformat /dev/fd0
 mformat a:

> Creation of the boot floppy failed.  Please make sure that the floppy was
> not write-protected, and that you put it in the first drive.  Try another
> floppy if the problem persists.
>
> This seems very similar to bug 99934!

Who knows, you provided to few details...

Gruss/Regards,
Eduard.
--
"Millionen von Fliegen, die um den Dreck schwirren,
 können sich nicht irren"
             (Auswertung der Win-95 Verkaufszahlen, in Chip 8/96)



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to