Due to wrong cmdline parsing, the installer failed to setup debian
properly for an ARM device where MTD partitions are provided by bootloader.
The bootloader pass this cmdline:
cmdlinepart.mtdparts="spi0.0:512k@0(uboot)ro,3M@0x100000(Kernel),12M@0x400000(RootFS1),2M@0x200000(Kernel_legacy),256k@0x80000(U-Boot
Config),256k@0xc0000(NAS Config)"
The debian installer creates /etc/modprobe.d/local.conf
# Local module settings
# Created by the Debian installer
options cmdlinepart
mtdparts="spi0.0:512k@0(uboot)ro,3M@0x100000(Kernel),12M@0x400000(RootFS1),2M@0x200000(Kernel_legacy),256k@0x80000(U-Boot
which is rubbish...
Regards,
Arnaud
