Hi, Brian Potkin <claremont...@gmail.com> wrote: > This is for D.3.4.4. Configure Networking. > > ============8<==================================8<======================= > > ####################################################################### > # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) > # See the interfaces(5) manpage for information on what options are > # available and look at the files in /usr/share/doc/ifupdown/examples/. > ####################################################################### > > # The loopback interface isn't really required any longer, > # but can be used if needed. > # > # auto lo > # iface lo inet loopback > > # To use dhcp: > # > # auto eth0 > # iface eth0 inet dhcp > > # An example static IP setup: (network, broadcast and gateway are optional) > # > # auto eth0 > # iface eth0 inet static > # address 192.168.0.42 > # netmask 255.255.255.0 > # gateway 192.168.0.1 > > Enter your nameserver(s) and search directives in /etc/resolv.conf: > > # editor /etc/resolv.conf > > A simple example /etc/resolv.conf: > > search example.com > nameserver 10.1.1.36 > nameserver 192.168.9.100 > > ==================8<======================8<======================== > > I hope this is reasonably helpful and sufficient for you to make a > decision.
Thanks Brian! I created a clean patch for this (attached) and will commit it shortly. Holger -- Holger Wansing <hwans...@mailbox.org> PGP-Finterprint: 496A C6E8 1442 4B34 8508 3529 59F1 87CA 156E B076
diff --git a/en/appendix/chroot-install.xml b/en/appendix/chroot-install.xml index fa3beba5d..6dd075af2 100644 --- a/en/appendix/chroot-install.xml +++ b/en/appendix/chroot-install.xml @@ -407,17 +407,18 @@ Here are some simple examples from # available. ###################################################################### -# We always want the loopback interface. +# The loopback interface isn't really required any longer, but can be used +# if needed. # -auto lo -iface lo inet loopback +# auto lo +# iface lo inet loopback # To use dhcp: # # auto eth0 # iface eth0 inet dhcp -# An example static IP setup: (broadcast and gateway are optional) +# An example static IP setup: (network, broadcast and gateway are optional) # # auto eth0 # iface eth0 inet static @@ -438,7 +439,7 @@ Enter your nameserver(s) and search directives in A simple example <filename>/etc/resolv.conf</filename>: <informalexample><screen> -search hqdom.local +search example.com nameserver 10.1.1.36 nameserver 192.168.9.100 </screen></informalexample>
