Package: installation-report Summary: Customer did what hardware vendor should have done
Hi, The original plan was to order a XPS 15 pre-install with Linux. Website of Dell has / had it too well hidden, so we ordered a XPS 15 9570 with MS Windows 10 and installed Linux. Installed with version 2018-08-06 from http://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/weekly-builds/amd64/iso-cd/ the non-free firmware is for the wireless network interface card. The .iso was dd-ed to a usb memory stick. Upon power-on pressed repeatly F12 to get One-Time Boot Menu Changed boot mode to 1) Legacy External Device Boot Mode, Secure Boot OFF Two warning screens/menus followed. Using lot of yellow text and even red text. Confirmed both with "Yes, my hardware, my choice of software" Booted from the usb memory stick ( not from the partition within the usb memory stick ) Was greeted by the graphical toplevel menu. Did choose 'install'. Not 'graphical install' to avoid possible issues. The 'graphic install' might work, it wasn't tested by me. There was a warning about missing firmware, it could be ignored due the use of the nonfree included CD image. ( With using the regular image (also from weekly build 2018-08-06) there was the same warning with more missing drivers missed, but ignoring that warning did get me a working WIFI connection. ) The install went fine. Packages being downloaded. The nvme disk being detected, partitioned, written. The first reboots weren't succesfull, additional tweaking was needed. Oh, by the way the firmware has a time sucking (customer insulting) way of reporting "no boot device was found". It enters selftest mode and after the plus five minutes test it eventually tells "no boot device". Aborting the selftest results into a shutdown. @Dell: Please report "no boot device" without going through selftest There was no boot device defined. Defined it manually in "BIOS". Bootsequence, EFI, ... serveral menus ... grubx64.efi Then it did boot into a black screen. Used usb memory stick again for booting into rescue mode. `dmesg` reported [0.799..] ahci 0000:00:17.0: Found 1 remapped NVMe devices. [0.799..] ahci 0000:00:17.0: Switch your BIOS from RAID to AHCI mode to use them. Done under F12 -> OTHER OPTIONS -> BIOS SETUP -> System Configuration -> SATA Operation The Dell XPS 15 9570 now runs Debian Buster. What works: * the nice graphical screen * keyboard * touchpad * the NVMe sdd * WIFI * and probably more (untested yet) Cheers Geert Stappers DevOps engineer
