It also seems to be broken on MIPSEL wget http://ftp.nl.debian.org/debian/dists/stretch/main/installer-mipsel/current/images/malta/netboot/initrd.gz wget http://ftp.nl.debian.org/debian/dists/stretch/main/installer-mipsel/current/images/malta/netboot/vmlinux-4.9.0-3-4kc-malta qemu-system-mipsel -M malta -m 256 -kernel vmlinux-4.9.0-3-4kc-malta -initrd initrd.gz -nographic
Greetings, Bruno On Tue, 20 Jun 2017 15:23:41 +0200 Bruno Bierbaumer <l...@bierbaumer.net> wrote: > Package: debian-installer-9-netboot-mips > Severity: normal > > Dear Maintainer, > > I wanted to install Debian Stretch MIPS in QEMU. > It seems that the netboot installer is broken and stops while unpacking the > initrd. > > Steps to reproduce: > wget > http://ftp.nl.debian.org/debian/dists/stretch/main/installer-mips/current/images/malta/netboot/initrd.gz > wget > http://ftp.nl.debian.org/debian/dists/stretch/main/installer-mips/current/images/malta/netboot/vmlinux-4.9.0-3-4kc-malta > qemu-system-mips -M malta -m 256 -kernel vmlinux-4.9.0-3-4kc-malta -initrd > initrd.gz -nographic > > Output: > [ 0.000000] Linux version 4.9.0-3-4kc-malta > (debian-ker...@lists.debian.org) (gcc version 6.3.0 20170516 (Debian > 6.3.0-18) ) #1 Debian 4.9.30-2 (2017-06-12) > [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') > [ 0.000000] bootconsole [uart8250] enabled > [ 0.000000] Config serial console: console=ttyS0,38400n8r > [ 0.000000] CPU0 revision is: 00019300 (MIPS 24Kc) > [ 0.000000] FPU revision is: 00739300 > [ 0.000000] MIPS: machine is mti,malta > [ 0.000000] Software DMA cache coherency enabled > [ 0.000000] Determined physical RAM map: > [ 0.000000] memory: 0ffff000 @ 00000000 (usable) > [ 0.000000] Kernel relocated by 0x00c50000 > .text @ 0x80d50000 > .data @ 0x8131cbb4 > .bss @ 0x81660000 > [ 0.000000] Initial ramdisk at: 0x80a60000 (22064934 bytes) > [ 0.000000] Reserving 0MB of memory at 0MB for crashkernel > [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. > [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 > bytes > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] > [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] > [ 0.000000] Initmem setup node 0 [mem > 0x0000000000000000-0x000000000fffefff] > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 64959 > [ 0.000000] Kernel command line: rd_start=0xffffffff80a60000 > rd_size=22064934 console=ttyS0,38400n8r > [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) > [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > [ 0.000000] Writing ErrCtl register=00000000 > [ 0.000000] Readback ErrCtl register=00000000 > [ 0.000000] Memory: 237016K/262140K available (5930K kernel code, 573K > rwdata, 1328K rodata, 1440K init, 284K bss, 25124K reserved, 0K cma-reserved) > [ 0.000000] NR_IRQS:256 > [ 0.000000] CPU frequency 200.00 MHz > [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, > max_idle_ns: 19112595867 ns > [ 0.000129] sched_clock: 32 bits at 100MHz, resolution 9ns, wraps every > 21474827259ns > [ 0.051138] Console: colour dummy device 80x25 > [ 0.052018] Calibrating delay loop... 1277.95 BogoMIPS (lpj=2555904) > [ 0.075931] pid_max: default: 32768 minimum: 301 > [ 0.076996] Security Framework initialized > [ 0.077196] Yama: disabled by default; enable with sysctl kernel.yama.* > [ 0.078078] AppArmor: AppArmor disabled by boot time parameter > [ 0.078572] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.078830] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 > bytes) > [ 0.092484] ftrace: allocating 18581 entries in 37 pages
