Package: installation-reports
Boot method: CD
Image version:
http://cdimage.debian.org/debian-cd/8.4.0/powerpc/iso-cd/debian-8.4.0-powerpc-kde-CD-1.iso
Date: 5-29-2016 around 8pm
Machine: Apple iMac G5 M9844LL/A
Processor: PowerPC 970fx
Memory: 2GB
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda5 ext4 73840152 2274736 67791448 4% /
udev devtmpfs 10240 0 10240 0% /dev
tmpfs tmpfs 403648 14080 389568 4% /run
tmpfs tmpfs 1008960 0 1008960 0% /dev/shm
tmpfs tmpfs 5120 64 5056 2% /run/lock
tmpfs tmpfs 1008960 0 1008960 0% /sys/fs/cgroup
tmpfs tmpfs 201856 0 201856 0% /run/user/1000
Output of lspci -knn (or lspci -nn):
0000:f0:0b.0 Host bridge [0600]: Apple Inc. U3L AGP Bridge [106b:0058]
Kernel driver in use: agpgart-uninorth
0000:f0:10.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] RV350 [Radeon 9550/9600/X1050 Series] [1002:4150]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RV350 [Radeon
9550/9600/X1050 Series] [1002:4150]
Kernel driver in use: radeon
0001:00:00.0 Host bridge [0600]: Apple Inc. U4 PCIe [106b:0056]
0001:00:01.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0053]
0001:00:02.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0054]
0001:00:03.0 PCI bridge [0604]: Apple Inc. Shasta PCI Bridge [106b:0055]
0001:01:01.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce
One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
Subsystem: Apple Inc. Device [106b:4318]
Kernel driver in use: b43-pci-bridge
0001:01:07.0 Unassigned class [ff00]: Apple Inc. Shasta Mac I/O [106b:004f]
Kernel driver in use: macio
0001:01:0b.0 USB controller [0c03]: NEC Corporation OHCI USB Controller
[1033:0035] (rev 43)
Subsystem: NEC Corporation USB Controller [1033:0035]
Kernel driver in use: ohci-pci
0001:01:0b.1 USB controller [0c03]: NEC Corporation OHCI USB Controller
[1033:0035] (rev 43)
Subsystem: NEC Corporation USB Controller [1033:0035]
Kernel driver in use: ohci-pci
0001:01:0b.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0
Controller [1033:00e0] (rev 04)
Subsystem: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0]
Kernel driver in use: ehci-pci
0001:02:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240]
Subsystem: Broadcom K2 SATA [1166:0240]
Kernel driver in use: sata_svw
0001:02:0d.0 Unassigned class [ff00]: Apple Inc. Shasta IDE [106b:0050]
Kernel driver in use: pata-pci-macio
0001:02:0e.0 FireWire (IEEE 1394) [0c00]: Apple Inc. Shasta Firewire [106b:0052]
Subsystem: Apple Inc. Device [106b:5811]
Kernel driver in use: firewire_ohci
0001:03:0f.0 Ethernet controller [0200]: Apple Inc. Shasta (Sun GEM) [106b:0051]
Kernel driver in use: gem
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems: I could not connect my computer to the internet while
installing.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
The installation seemed to have gone smoothly. Didn't notice any error messages
while installing. Booting the installation leads to a GUI-less command prompt.
No display manager in sight. Startx failed with some error message that
disappears quickly. Then another command-prompt is displayed, but this one
doesn't work. Typing anything into it does not work.
